Bedienungsanleitung JVC av 28wt 5 (Seite 18 von 36) (Englisch)

149474

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

3LFWXUH#IHDWXUHV

3LFWXUH#IHDWXUHV3LFWXUH#IHDWXUHV

3LFWXUH#IHDWXUHV

To display the PICTURE FEATURES menu:

Press the

button to display MENU (main

menu)

Press the

buttons to choose PICTURE

FEATURES, and press the

button

■

■■

■

$872#915

$872#915$872#915

$872#915

VNR Stands for “video noise reduction”.

The AUTO VNR function reduces any “noise” (interference or

snowing) in the current picture. The function also adjusts the

optimum sharpness of the picture (SHARP).

Press the

buttons to choose AUTO

VNR

Press the

buttons to choose AUTO

MIN:

The AUTO VNR function is cancelled. If you set the

mode to AUTO but feel that the sharpness of the original

picture has not been reproduced fully, change the mode

to MIN. However, any noise remaining in the original

picture may be emphasized.

MAX:

This mode always reduces any noise as much as

possible, irrespective of state of the picture. When you

set the mode to AUTO but still notice some noise,

change the mode to MAX. However, this may reduce the

sharpness of the picture.

Press the

button to complete the

setting.

The menu disappears.

■

■■

■

&2/285#6<67(0

&2/285#6<67(0&2/285#6<67(0

&2/285#6<67(0

The colour system is chosen automatically. However, if the

picture is not clear or no colour appears, choose the colour

system manually.

Press the

buttons to choose COLOUR

SYSTEM. Then press the

button

The sub-menu of the COLOUR SYSTEM function

appears.

Press the

buttons to choose the

appropriate colour system.

PAL:

PAL system

NTSC 3.58:

NTSC 3.58 MHz system

NTSC 4.43

NTSC 4.43 MHz system

AUTO:

This function detects a colour system from the input

signal. You can only use this when you are viewing a

picture from programme number PR 0 (AV), or on EXT

terminal.

Press the

button to complete the

setting

The menu disappears.

• The AUTO function may not work properly if you

have poor signal quality. If the picture is abnormal in

the AUTO function, choose another colour system

manually.

• You cannot choose NTSC 3.58 or NTSC 4.43 for

programme numbers PR 0 (AV) to PR 99.

■

■■

■

7=6#$872#$63(&7

7=6#$872#$63(&77=6#$872#$63(&7

7=6#$872#$63(&7

This function only works when the ZOOM mode is set to

AUTO(WSS) mode. It sets the ZOOM mode you want to use

for when a WSS signal is not included in the broadcast signal

or the signal from an external device. You can choose one of

three ZOOM modes.

• For details of the AUTO(WSS) mode, see the “AUTO

(WSS)” section within “3 ZOOM button” on page 11.

Press the

buttons to choose 4:3 AUTO

ASPECT. Then press the

button

The sub-menu of the 4:3 AUTO ASPECT function

appears.

Press the

buttons to choose a ZOOM

mode

Press the

button to complete the

setting

The menu disappears.

WFT1EK_E2.fm Page 18 Wednesday, January 17, 2001 9:30 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC av 28wt 5 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info