Bedienungsanleitung JVC av-28x37 (Seite 39 von 43) (Englisch)

145955

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

Additional preparation

$9;+.(+,(/&7$8(1*/,6+

 Equipment which can output the

S-VIDEO signal (Y/C signal) such

as an S-VHS VCR

Connect the equipment to an EXT terminal

(but not the EXT-1 terminal).

You can choose between an S-VIDEO signal

(Y/C signal) and a regular video signal

(composite signal). For details of how to

operate the equipment, see “S-IN (S-VIDEO

input)” on page 26.

 T-V LINK compatible VCR

Be sure to connect the T-V LINK compatible

VCR to the EXT-2 terminal. If not, the T-V

LINK function will not work properly.

• When connecting a T-V LINK compatible

VCR to the EXT-2 terminal, be sure to

connect the decoder to the VCR. If not,

the T-V LINK function may not work

properly. After you have stored TV

channels in the programme numbers (PR)

list, set the DECODER (EXT-2) function

for the programme number (PR) to ON to

unscramble a scrambled TV channel. For

details, see “Using the DECODER (EXT-

2) function” on page 36.

 Connecting headphones

Connect the headphones with a stereo mini-

jack (3.5 mm diameter) to the headphone

jack at the TV rear panel.

• When you connect the headphones, the

TV speakers go off.

 Video or sound signal output from

the EXT-2 terminal

You can change over the output of the video/

sound signal from the EXT-2 terminal. This

is useful when you want to dub the video/

sound from another device onto the VCR

connected to the EXT-2 terminal. For details

on how to do this, see “DUBBING” on

page 27.

 TV output from the EXT-1 terminal

The video/sound signal of a TV channel you

are viewing is always output from the EXT-1

terminal.

• Changing over a programme number (PR)

also changes over the TV output from the

EXT-1 terminal.

• The video/sound signal from an EXT

terminal cannot be output.

• Teletext programmes cannot be output.

 Connecting speakers/

amplifier

See the audio equipment connection diagram

and connect the audio equipment to the TV.

You can use external front speakers to listen

to the TV sound instead of the TV speakers.

Before connecting anything:

• Read the manuals provided with the

amplifier and speakers.

• Turn the TV and amplifier off.

• To prevent magnetism from the speakers

adversely affecting the TV screen, use

magnetically-shielded speakers for the

front speakers.

• Note that connecting cables are not

supplied.

• The output from the AUDIO OUT

terminal is not interrupted by connecting

headphones to the TV. You cannot cut the

sound from the front speaker even if you

connect a headphone to the TV.

• Adjust the volume of the external

speakers with the amplifier.

Back of the TV

1 Amplifier

2 Front speakers (Magnetic-shielded type)

AV-32&28X37HKE.book Page 39 Thursday, January 23, 2003 11:19 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC av-28x37 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info