Bedienungsanleitung JVC AV21KT1B (Seite 13 von 96) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch)

474009

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

ENGLISH - 12 -

Via the Euroconnector

Your TV set has two Euroconnector sockets. If you want to

connect equipments (e.g. video recorder, decoder, etc.) which

have Euroconnectors, to your TV, use the AV-1 (SCART 1) or

AV-2 (SCART 2) terminals.

If an external device is connected via Euroconnector sockets

TV is switched to AV mode automatically.

RGB mode

If an equipment can output the RGB signals, connect it to the

AV-1 (SCART 1) terminal.

AV-2 S Mode

If the equipment connected to your TV set supports S-Video

(Y/C) output from Euroconnector, you can have a better pic-

ture quality by selecting AV-2 S mode and connecting your

equipment to the AV-2 S (SCART 2) terminal of TV. See your

equipment's booklet to check if your equipment has such fea-

ture.

Via the RCA jacks

If you have an equipment (such as a Camcorder) which has

the RCA jacks, connect it to the F-AV (Front AV) terminal

with the video and audio cables.

 If the epuipment has the mono audio jack, connect it to the

AUDIO-L jack.

Via the ANT (aerial) socket

If your equipment does not have an Euroconnector or RCA

jacks, connect it to the TV with an aerial cable. For details,

see the manual provided with the equipment.

 To store the test signal that comes from the equipment, see

"Install. Menu" on page 7 and store it to the programme

number 0. You can watch images from that equipment to

select the programme number which you stored the test

signal.

TV and Video Recoder (VCR)

 Connect the Video Recorder to the ANT (antenna input)

socket of the TV with the aerial cable.

 Connect the Video Recorder to the AV-1 or AV-2 terminal

with the SCART cable, or connect it to the F-AV (Front AV)

terminal with the audio and video cables.

NTSC Playback

Connect a NTSC video recorder to a terminal. Then press

AV button to select the corresponding AV mode.

NTSC 3.58/4.43 system is detected automatically in AV

mode.

Copy Facility

You can output the video and audio signals which inputs from

TV or AV-1 (SCART 1) terminal to the video recorder connect-

ed to the AV-2 (SCART 2) terminal.

 To select the output source, see AV-2 OUTPUT on page 7.

Connecting Headphones

Use the stereo headphone socket of your TV, to connect

headphones.

Tips

Care of the Screen

Clean the screen with a slightly damp, soft cloth. Do not use

abrasive solvents as they may damage the TV screen coating

layer.

Poor Picture

Have you selected the correct TV system? Is your TV set or

house aerial located too close to the loudspeakers, non-

earthed audio equipment or neon lights, etc. ?

Mountains or high buildings can cause double pictures or

ghost images. Sometimes you can improve the picture quali-

ty by changing the direction of the aerial.

The picture quality may degrade when two peripherals are

connected to the TV at the same time. In such a case, dis-

connect one of the peripherals.

No Picture

Is the aerial connected properly? Are the plugs connected

tightly to the aerial socket? Is the aerial cable damaged? Are

suitable plugs used to connect the aerial? If you are in doubt,

consult your dealer.

No Picture means that your TV is not receiving any trans-

mission. Have you pressed the correct keys on the remote

control? Try once more.

Sound

Sound is coming from only one of the speakers. Is the bal-

ance set to one direction extreme? See SOUND menu.

Remote Control

Your TV no longer responds to the remote control. Press the

STANDARD button on the remote control once more. Per-

haps the batteries are exhausted. If so you can still use the

local buttons at the front of your TV.

Have you selected the wrong menu? Press STANDARD but-

ton to return to TV mode or press MENU button to return to

the previous menu.

No solution

Switch your TV set off and on. If this does not work, call the

service personnel; never attempt to repair it yourself.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC AV21KT1B Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info