Bedienungsanleitung JVC AX-THL1 (Seite 29 von 40) (Englisch)

56438

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Operations for USB MEMORY

Resuming playback

When Resume Playback is set to “ON” (see page

31) and you stop playback by the following

operations, the position where playback has

been stopped is stored. (

“RESUME” appears on

the display window.)

• Turning off the power (see page 16)

• Pressing 7 once

• Changing the source (see page 16)

To start playback from the stored position

• Press USB MEMORY 6 on the remote control or iPod/

USB MEMORY CONTROL ‹/8 on the center unit.

• Select

“USB MEMORY” as the source again if you

changed the source.

To clear the stored position

Press 7 again.

• Disconnecting the USB mass storage class device also

clears the stored position.

Zooming in

7During playback or while paused

1 Press ZOOM.

Each time you repeat the procedure, the

scene magnification changes.

2 While zoomed in, press 2/3/5/

Y to move zoom-in area.

To return to normal playback

Press ZOOM repeatedly, to select OFF.

NOTE

• The number of the magnification steps varies depending on

the file type.

• During slide-show playback of JPEG, zooming in is not

available. In such a case, press

USB MEMORY 6 to pause

slide-show playback, then zoom in.

•During playback,

2/3/5/Y may not work in step 2.

Changing the VFP setting

The VFP (Video Fine Processor) function

enables you to adjust the picture character

according to the type of programming, picture

tone or personal preference.

7During playback

1 Press VFP.

The current VFP settings appear on the TV screen.

2 Press 2/3 repeatedly to select

the VFP mode.

• NORMAL: Normally select this.

• CINEMA: Suitable for movies.

When you select “NORMAL” or “CINEMA,” press VFP

to complete the setting.

• USER 1 and USER 2: You can adjust parameters that

affect picture appearance.

Only when selecting “USER 1” or “USER 2” in step 2,

proceed to perform the following operation;

3 Press 5/Y repeatedly to select a

parameter you want to adjust.

Adjust gradually and confirm picture appearance

results are as preferred.

• GAMMA: Control brightness of neutral tints while

maintaining brightness of dark and bright portions

(–3 to +3).

• BRIGHTNESS: Control screen brightness (–8 to +8).

• CONTRAST: Control screen contrast (–7 to +7).

• SATURATION: Control screen color depth (–7 to

+7).

• TINT: Control screen tint (–7 to +7).

• SHARPNESS: Control screen sharpness (–8 to +8).

4 Press ENTER.

5 Press 5/Y to change the setting.

6 Press ENTER.

The current VFP settings appear again.

7 Repeat steps 3 to 6 to adjust other

parameters.

8 Press VFP.

NOTE

• If the setting display disappears in the middle of the

procedure, the setting at that time will be stored.

Example:

See page 21 for button locations.

TH-L1[JC].book Page 25 Friday, March 16, 2007 10:22 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC AX-THL1 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC AX-THL1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info