Bedienungsanleitung JVC DLA-RS3100 (Seite 71 von 125) (Englisch)

804113

Zoom out

Zoom in

Vorherige Seite

1/125

Nächste Seite

Theater Optimizer

This feature automatically configures the overall brightness level during tone mapping according to the screen size and

state of the projector.

Æ “Using the “Theater Optimizer”” (P. 48)

To use, configure the details of the screen in use in “Screen Setting”, followed by pressing “Set”.

*1 This option does not appear in the menu when “Content Type” is configured to “SDR”.

*2 This can be configured only when “Picture Mode” is configured to “Frame Adapt HDR 1”~“Frame Adapt HDR 3”.

MEMO

Besides displaying the “Screen Setting” menu using “Installation”"“Screen Setting”, you can also press the “Screen

Setting” button in the “Theater Optimizer” menu to display it.

CAUTION

Pressing “Set” in the “Theater Optimizer” menu automatically applies the details of the screen and state of the projector

in the auto settings of “Theater Optimizer”.

If “Set” is not pressed in the “Theater Optimizer” menu, the settings are applied after the next restart of the unit or change

of the “Installation Mode”.

HDR Quantizer

This is a feature for adjusting the overall brightness during tone mapping. For configuring the auto correction intensity

of the “Theater Optimizer” feature when “Theater Optimizer” is configured to “On”.

*1 This option does not appear in the menu when “Content Type” is configured to “SDR”.

*2 This can be configured only when “Picture Mode” is configured to “Frame Adapt HDR 1”~“Frame Adapt HDR 3”,

“FILMMAKER MODE” or “HDR10+”.

*3 The higher the nit level of the image the lower the HDR Quantizer will be.

When “Picture Mode” is configured to “Frame Adapt HDR 1”~“Frame Adapt HDR 3”, and “Theater

Optimizer” is configured to “Off”, or when “Picture Mode” is configured to “FILMMAKER MODE”

Setting Description

Auto (Normal) Automatically selects an appropriate tone mapping based on the mastering

information (MaxCLL/FALL) of the content.

Auto (Wide) Automatically selects an appropriate tone mapping based on the mastering

information (MaxCLL/FALL) of the content. A comparison is made with “Auto

(Normal)” to switch to the direction that will become brighter.

-2 Displays in a tone map with 600 nits as the clip point.

-1 Displays in a tone map with 400 nits as the clip point.

0 Displays in a tone map with 300 nits as the clip point.

1 Displays in a tone map with 200 nits as the clip point.

2 Displays in a tone map with 150 nits as the clip point.

When “Picture Mode” is configured to “Frame Adapt HDR 1”~“Frame Adapt HDR 3”, and “Theater

Optimizer” is configured to “On”

Setting Description

Auto (Normal) Automatically corrects the overall brightness level based on the mastering

information (MaxCLL/FALL) of the content.

Auto (Wide) Automatically corrects the overall brightness level based on the mastering

information (MaxCLL/FALL) of the content. A comparison is made with “Auto

(Normal)” to switch to the direction that will become brighter.

-2 to 2 For configuring the overall brightness level during auto correction.

-2 (dark) to 2 (bright)

Adjust/Set

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC DLA-RS3100 Seite 71

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC DLA-RS3100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info