Bedienungsanleitung JVC DLA-X30 (Seite 3 von 288) (Englisch, Französisch, Spanisch)

476033

Zoom out

Zoom in

Vorherige Seite

1/288

Nächste Seite

Getting Started

ENGLISH

- power source indicated on the label. If you are

not sure of the type of power supply to your

home, consult your product dealer or local

power company.

- This product is equipped with a three-wire plug.

This plug will t only into a grounded power

outlet. If you are unable to insert the plug into

the outlet, contact your electrician to install the

proper outlet. Do not defeat the safety purpose

of the grounded plug.

- Power-supply cords should be routed so that

they are not likely to be walked on or pinched

by items placed upon or against them. Pay

particular attention to cords at doors, plugs,

receptacles, and the point where they exit from

the product.

- For added protection of this product during a

lightning storm, or when it is left unattended and

unused for long periods of time, unplug it from

the wall outlet and disconnect the cable system.

This will prevent damage to the product due to

lightning and power line surges.

- Do not overload wall outlets, extension cords, or

convenience receptacles on other equipment as

this can result in a risk of re or electric shock.

- Never push objects of any kind into this product

through openings as they may touch dangerous

voltage points or short out parts that could result

in a re or electric shock. Never spill liquid of

any kind on the product.

- Do not attempt to service this product yourself

as opening or removing covers may expose you

to dangerous voltages and other hazards. Refer

all service to qualied service personnel.

- Unplug this product from the wall outlet and

refer service to qualied service personnel

under the following conditions:

a) When the power supply cord or plug is damaged.

b) If liquid has been spilled, or objects have fallen on

the product.

c) If the product has been exposed to rain or water.

d) If the product does not operate normally by

following the operating instructions. Adjust only

those controls that are covered by the Operation

Manual, as an improper adjustment of controls may

result in damage and will often require extensive

work by a qualied technician to restore the product

to normal operation.

e) If the product has been dropped or damaged in any

way.

f ) When the product exhibits a distinct change in

performance, this indicates a need for service.

- When replacement parts are required, be sure

the service technician has used replacement

parts specied by the manufacturer or with

same characteristics as the original part.

Unauthorized substitutions may result in re,

electric shock, or other hazards.

- Upon completion of any service or repairs to

this product, ask the service technician to

perform safety checks to determine that the

product is in proper operating condition.

- All warnings on the product and in the operating

instructions should be adhered to.

- All operating instructions should be followed.

- Place the projector near a wall outlet where the

plug can be easily unplugged.

- Unplug this product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol

cleaners. Use a damp cloth for cleaning.

- Do not use attachments not recommended by the

product manufacturer as they may be hazardous.

- Do not use this product near water. Do not use

immediately after moving from a low temperature

to high temperature, as this causes condensation,

which may result in re, electric shock, or other

hazards.

- Do not place this product on an unstable cart,

stand, or table. The product may fall, causing

serious injury to a child or adult, and serious

damage to the product. The product should be

mounted according to the manufacturer’s

instructions, and should use a mount recommend

ed by the manufacturer.

- When the product is used on a

cart, care should be taken to avoid

quick stops, excessive force,

and uneven surfaces which may

cause the product and cart to

overturn, damaging equipment or

causing possible injury to the

operator.

- Slots and openings in the cabinet are provided for

ventilation. These ensure reliable operation of the

product and protect it from overheating. These

openings must not be blocked or covered. (The

openings should never be blocked by placing the

product on bed, sofa, rug, or similar surface. It

should not be placed in a built-in installation such

as a bookcase or rack unless proper ventilation is

provided and the manufacturer’s instructions have

been adhered to.)

- To allow better heat dissipation, keep a clearance

between this unit and its surrounding as shown

below. When this unit is enclosed in a space of

dimensions as shown below, use an air-conditioner

so that the internal and external temperatures are

the same. Overheating can cause damage.

150 mm and above

300 mm

and above

200 mm

and above

300 mm

and above

150 mm

and above

PORTABLE CART WARNING

(symbol provided by RETAC)

S3126A

Front

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC DLA-X30 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info