Bedienungsanleitung JVC DLA-X7000 (Seite 62 von 80) (Englisch)

621755

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Video image does not appear

Check Action Refer to

Is the correct external input selected? Select the correct external input terminal. P. 21

Is the power of the AV device turned on? Turn on the power of the AV device and play the video. P. 18

Is the AV device properly connected? Connect the AV device properly. P. 18

Are the correct signals being output from

the AV device?

Set the AV device properly. P. 18

Is the cable in use an HDMI-certified

cable?

Use an HDMI-certified high-speed cable. Also, use as

short a cable as possible.

P. 18

Is an intermediate device (AV amplifier,

divider, etc.) in use?

Change the sequence of turning on the source device,

intermediate device and the projector.

And after turning on

each device, ensure that the signal output is stable before

turning on the next device.

P. 18

Is an old source device in use? Change the resolution setting of the source device. For

details on how to change the setting, please refer to the

instruction manual of the source device. Or, try connecting

to the HDMI2 terminal and set “HDMI2 EDID” to “B”.

P. 47

3D images do not appear

Check Action Refer to

Do you see two images displayed side by

side?

Set “3D Format” to “Side by Side”

Video images in the “Side by Side” format may not be

recognized automatically in the case of 3D video images.

P. 29

Is an intermediate device (AV amplifier,

divider, etc.) in use?

Connect the source device to the projector directly, and

check whether there is any improvement in the condition.

If the condition improves, it is likely that this is not caused

by malfunction of the projector.

P. 18

Is the cable in use an HDMI-certified

cable?

Use an HDMI-certified high-speed cable.

Also, use as short a cable as possible.

P. 18

Is the power of the 3D GLASSES turned

on?

If you are using the PK-AG2 or PK-AG33D GLASSES, turn

on the power manually.

Check the

instruction

manual of the 3D

GLASSES and

3D SYNCHRO

EMITTER.

Are the 3D GLASSES charged? Check whether the PK-AG1 battery of the 3D GLASSES

has run out, and whether PK-AG2 and PK-AG3 are

charged.

Are the 3D GLASSES and 3D

SYNCHRO EMITTER too far away from

each other?

Position them at an appropriate distance.

Is the 3D GLASSES and 3D SYNCHRO

EMITTER combination correct?

Check the model name of 3D GLASSES and 3D

SYNCHRO EMITTER, and use the correct combination.

P. 9

3D video image looks unnatural

Check Action Refer to

Are there overlapping video images? If there are overlapping video images partially, this is due

to the crosstalk phenomenon.

In this case, adjust “Crosstalk Cancel” accordingly.

P. 29

If there are overlapping video images partially, this is due

to the crosstalk phenomenon.

This phenomenon often occurs when there are drastic

changes in the brightness.

In this case, set Lamp Power to “High”

P. 43

Troubleshooting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC DLA-X7000 Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC DLA-X7000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info