Bedienungsanleitung JVC DR-M70 (Seite 18 von 68) (Englisch)

56206

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Getting Started

Manual tuning

Manually tune each channel.

1 In stop mode, press [SET UP].

“Easy Setting Menu” or “Advanced Setting Menu”

will appear.

2 Select “Channel” using

[Cursor U / D], then press [ENTER].

3 Select “Manual Tuning” using

[Cursor U / D], then press [ENTER].

4 Select “Position” using

[Cursor U / D], then press [ENTER].

5 Select the position number you wish

to use using [the Number buttons] or

[Cursor U / D], then press

[RETURN].

You can select position numbers 01 to 99.

6 Select “Channel” using

[Cursor U / D], then press [ENTER].

7 Press [Cursor U / D] to start

scanning.

• The tuner will begin to search up or down

automatically. When a channel is found, the unit

will stop searching and the picture will appear

on the TV screen.

• You can select a desired channel number using

[the Number buttons]. Refer to the following

Channel Plan table and press the three digits to

select the channel number.

(To select channel 4, press [0] first and then

press [0] and [4]. Or press [4] and then “– – 4”

appears and wait for 2 seconds.)

• If this is the channel you want, press

[RETURN].

This unit can receive the Hyper and Oscar

frequency bands.

• If “Skip” is set to “ON,” select “Skip” using

[Cursor U / D], then press [ENTER]. Select

“OFF” using [Cursor U / D], then press

[RETURN].

• If you want to decode scrambled signals, select

“Decoder” using [Cursor U / D], then press

[ENTER]. Select “ON” using [Cursor U / D],

then press [RETURN].

• To store another channel, repeat steps 4 to 7.

8 After completion, press [SET UP] to

exit.

To select a channel

Notes on using the Number buttons:

• Enter channel numbers as a two-digit number for

the quickest result. For example, to select channel

6, press [0] and [6]. If you only press [6], channel 6

will be selected after 2 seconds. You can only select

channels 1 to 99.

• You can select the external input mode “AV1”,

“AV2”, “AV3” or “AV4.”

• To select “AV1,” press [0], [0], [1].

• To select “AV2,” press [0], [0], [2].

• To select “AV3,” press [0], [0], [3].

• To select “AV4,” press [0], [0], [4].

To skip a Preset channel

You can set the unit to skip channels you can no

longer receive or seldom watch when you access

channels using [PR

1 Follow steps 1 to 3 in “Manual

tuning.”

2 Select “Position” using

[Cursor U / D], then press [ENTER].

3 Select the position number you wish

to skip using [the Number buttons]

or [Cursor U / D], then press

[RETURN].

4 Select “Skip” using [Cursor U / D],

then press [ENTER].

5 Select “ON” using [Cursor U / D],

then press [RETURN].

• To skip another channel, repeat steps 2 to 5.

6 Press [SET UP] to exit.

Channel Plan

Ch. Indication TV Channel

02 - 12 E2 - E12

13 - 20 A - H (only ITALY)

21 - 69 E21 - E69

74 - 78 X, Y, Z, Z+1, Z+2

80 - 99, 100 S1 - S20, GAP

121 - 141 S21 - S41

Channel 12

Decoder OFF

Skip ON

Position P01

Manual Tuning

E6850ED_EN.book Page 18 Wednesday, August 3, 2005 4:02 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC DR-M70 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC DR-M70

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info