Bedienungsanleitung JVC DR-M70 (Seite 26 von 68) (Englisch)

56206

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Recording

Checking the recording picture and

sound quality

Before recording on a DVD, you can confirm the

quality of the picture and sound with the recording

speed you selected.

1 Make sure that the unit is in STOP or

REC mode and a DVD is inserted

correctly.

2 Press [REC MONITOR].

The TV will display the programme and output the

sound you are about to record in the quality of the

picture and sound (determined by the recording

speed) you selected.

• If you want to change the recording speed (to

improve the recording quality), press

[REC SPEED] repeatedly.

The recording speed is changed each time you

press the button.

• You cannot change the recording speed during

recording.

3 Press [REC MONITOR] again to exit.

Hint

• If you press [REC MONITOR] while receiving the

bilingual broadcast, the sound to be recorded will be

output.

One-touch timer recording

(OTR)

This is a simple way to set the recording time in

blocks of 30 minutes. Check that the disc you are

recording onto has enough space remaining for the

time you set.

1 Turn on the unit and insert a

recordable disc.

Make sure that the TV input is set on the unit.

2 Select the recording speed using

[REC SPEED].

(See page 21.)

Make sure that the recording format is set to the

desired mode. (See page 23.)

3 Select the desired channel to record

using [PR +/

] or [the Number

buttons].

4 Press [REC I] repeatedly until the

desired recording time (30 minutes

to 4 hours) appears on the TV

screen.

One-touch timer recording will start.

• To change the recording length during one-

touch timer recording, press [REC I]

repeatedly until the desired length appears.

• To cancel one-touch timer recording within the

specified time, press [STOP S].

Hint

• The remaining recording time will appear on the TV

screen during one-touch timer recording. Press

[ON SCREEN] to see it on the TV screen.

• The remaining recording time will be displayed on

the front panel display during one-touch timer

recording.

• Unlike timer recording, you can perform the

following operations during one-touch timer

recording.

- Turn off the power.

-Use [REC I] or [STOP S].

Note

• You cannot use the pause function during one-touch

timer recording.

• The unit will be turned off automatically under the

following conditions.

- No space remains on the disc.

- If a power failure occurs.

• When an OTR finishes, the unit automatically turns

itself off. If there is any timer recording in standby,

the unit automatically switches to the timer-standby

mode. Press [STANDBY/ON y/I] to cancel the

timer-standby mode to use the unit continuously.

DVD-RWDVD-RW

Video

DVD-RWDVD-RW

DVD-RDVD-R

XP SP LP EP SLP SEP

DVD-RWDVD-RW

Video

DVD-RWDVD-RW

DVD-RDVD-R

0:30

4:00 3:30

1:00

OFF

(Normal Recording)

E6850ED_EN.book Page 26 Wednesday, August 3, 2005 4:02 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC DR-M70 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC DR-M70

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info