Bedienungsanleitung JVC DR-MH30 (Seite 60 von 92) (Englisch)

57386

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

Filename [MH30_20S_11Editing.fm]

Masterpage:Left+

60 EN

EDITING

Page 60 Thursday, 7 April 2005 10:14

You can dub programmes from a camcorder or DV equipment

connected to the unit with a DV cable. The unit’s remote control

allows you the limited control of the connected camcorder or DV

equipment functions during dubbing.

The following on-screen display for DV dubbing appears when

ON SCREEN is pressed while the channel has been set to ADVB.

A Remote control switch

To switch between the devices operable by the remote control

unit. The unit is operable when the remote icon ( )

displayed faces to the left, while the DV device is operable

when the remote icon is facing to the right.

B Auto capture button

Select to start or pause the dubbing. If ENTER is pressed when

the DV device is in the pause condition, preroll editing* where it

is possible to dub with a start time that is highly accurate will be

activated. When the DV device cannot be operated from the unit

(such as in camera mode), proceed with normal recording

(A pg. 35, 38).

* Preroll editing refers to the playback after the DV tape is slightly

rewind. (For DV devices that do not support the –1x speed, the

rewinding time may be longer.)

C Sound monitor switch

For selecting the desired sound format for dubbing.

1 Connect a camcorder or DV equipment to the [DV IN]

connector on the unit’s front panel.

2 Press HDD so that the HDD lamp lights up on the unit.

3 Press PR +/– to set the channel to ADVB.

4 Press ON SCREEN.

● The on-screen display for DV dubbing appears.

5 Press selection keys to select , then press ENTER

to display the remote icon (facing to the right) for the DV

equipment.

6 Press REC MODE repeatedly to set the recording mode.

7 Locate the point from where you want to start dubbing, then

stop or pause playback by pressing the following buttons on the

remote control: I, N, O, o, W.

● To play back in slow speed (1/10 of the normal speed), press W

to pause playback, then press O or N.

● To play back frame-by-frame, press W to pause playback, then

press W repeatedly. Each press of W advances a frame.

● To change the playback direction, press O or N.

8 Press selection keys to select , then press ENTER

repeatedly until the desired sound track appears on the TV

screen.

SOUND 1:

Select this to record the original stereo sound played back on

the connected DV equipment.

SOUND 2:

Select this to record the dubbed stereo sound played back on

the connected DV equipment.

MIX:

Select this to record the sound of both ASOUND 1B and

ASOUND 2B.

● Note that this selection is not available when the source

programme is recorded in 16BIT (48 kHz) mode.

DV Dubbing

NOTES:

● Use the DV cable VC-VDV 204U for connection.

● When you connect a PC to the [DV IN] connector, we do not

assure the normal operation of this unit.

To [DV IN]

DV cable

(VC-VDV 204U)

(not supplied)

Camcorder

DV connector

Your unit

DV equipment

L–R

SOUND1

0:00 1:00 2:00

GR-DV3500

GR-DV3500DV

HDD

00:00 : 00. 00

12bit

JVC

00:00 : 00. 00

FR360

DV DV

1 2

A B C

MH30_20S_00.book Page 60 Thursday, April 7, 2005 10:14 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC DR-MH30 Seite 60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC DR-MH30

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info