Bedienungsanleitung JVC DR-MV1SUC (Seite 6 von 24) (Englisch)

57095

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

1-6 (No.YD006)

2.2.1 Changing Remote Control Code

(1) Slide the TV/CABLE/DBS/DVD switch to DVD.

(2) Press the numeric button "1" of the remote control unit

while pressing the "SET UP" button of the remote control

unit. Then,press the "ENTER" button, and then release the

"SET UP" button.

(3) Press the "POWER" button on the unit to turn off the unit.

(4) Press the "PLAY" button on the unit for over 5 seconds

while the unit is turned off. The code currently set appears

on the front display panel.

(5) Press the "STOP" button on the remote control to change

the unit’s code. When FDP indicator displays "DVD1," it

means that the Remote Control Code has been changed to

"1."

2.2.2 Setting the Jig RCU mode

(1) Turn on the power.

(2) Press the “VCR/DVD“ button repeatedly on the unit so that

the VCR lamp lights up on the unit.

(3) Press the following remocon keys continuously within 2

seconds " SET UP " → " 2 " → " 8 " → " ENTER ".

When the VCR is set to the Jig RCU mode, the symbols

( " : " ) in the time display of the FDP are blinked.

(Refer to Fig.2-2a User/Jig RCU mode)

2.2.3 Setting the User RCU mode

(1) Turn off the power.

(2) Press the "REC" and "PAUSE" buttons of the VCR simul-

taneously. Alternatively, transmit the code "9D" from the

Jig RCU.

2.3 Mechanism service mode

This model has a unique function to enter the mechanism into ev-

ery operation mode without loading of any cassette tape. This

function is called the "Mechanism service mode".

2.3.1 How to set the "Mechanism service mode"

(1) Set the VCR to the Jig RCU mode (the mode in which

codes from the Jig RCU can be received)

(2) Transmit the code "E5" from the Jig RCU.

(3) Release the lug of the Cassette holder and then slide the

Cassette holder toward the direction where the Cassette

holder is loaded by manually.

(4) The cassette holder lowers and, when the loading has

completed, the mechanism enters the desired mode.

When the VCR is set to the Mechanism service mode, the

symbols ("HDD") in the FDP (LED) are turned on.

2.3.2 How to exit from the "Mechanism service mode"

(1) Unplug the power cord plug from the power outlet.

2.4 Maintenance and inspection

2.4.1 Cleaning

Regular cleaning of the transport system parts is desirable but

practically impossible. So make it a rule to carry out cleaning of

the tape transport system whenever the machine is serviced.

When the video head, tape guide and/or brush get soiled, the

playback picture may appear inferior or at worst disappear, re-

sulting in possible tape damage.

Note:

• Absolutely avoid sweeping the upper drum vertically as

this will cause damage to the video head.

(1) When cleaning the upper drum (especially the video head),

soak a piece of closely woven cloth with alcohol and while

holding the cloth onto the upper drum by the fingers, turn

the upper drum counterclockwise.

(2) To clean the parts of the tape transport system other than

the upper drum, use a piece of closely woven cloth or a cot-

ton swab soaked with alcohol.

(3) After cleaning, make sure that the cleaned parts are com-

pletely dry before using the cassette tape.

Fig.2-4a

2.4.2 Lubrication

With no need for periodical lubrication, you have only to lubricate

new parts after replacement. If any oil or grease on contact parts

is soiled, wipe it off and newly lubricate the parts.

Note:

• See the "mechanism assembly" diagram of the "parts

list" for the lubricating or greasing spots, and for the

types of oil or grease to be used.

2.4.3 Suggested servicing schedule for main components

The following table indicates the suggested period for such ser-

vice measures as cleaning, lubrication and replacement. In prac-

tice, the indicated periods will vary widely according to

environmental and usage conditions. However, the indicated

components should be inspected when a set is brought for ser-

vice and the maintenance work performed if necessary. Also

note that rubber parts may deform in time, even if the set is not

used.

C : Cleaning

X : Inspection or Replacement if necessary

System Parts name

Operation hours

1000H 2000H

Tape

transport

Drum assembly C,X X

A/C head C,X C,X

Pinch roller arm assembly C C

Full erase head C C

Tension arm assembly C C

Capstan motor (Shaft) C C

Guide arm assembly C C

Drive

Capstan motor X

Capstan brake assembly X

Main brake assembly X

Belt (Capstan) X X

Loading motor X

Clutch unit X

Worm gear X

Control plate X

Other Rotary encoder X

Video heads

A/C head

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC DR-MV1SUC Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info