Bedienungsanleitung JVC DR-MV1SUC (Seite 16 von 24) (Englisch)

57095

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

1-16 (No.YD006)

Fig.5-2a

5.3 Emergency display function (VHS SECTION)

This unit saves details of the last two emergencies as the EMG

history and allows the status of the VCR and the mechanism of

each emergency to be shown both on the display and as OSD in-

formation.

When using the emergency function, it is required to set the VCR

to the Jig RCU mode.

Fig.5-3a Jig RCU [PTU94023B]

5.3.1 Displaying the EMG information

The EMG detail of information can be displayed by transmitting

the code "59" from the Jig RCU.

Note:

• The EMG detail information <1><2> show the informa-

tion on the latest EMG.

It becomes “ - - : - - : - - ” when there is no latest EMG

record.

EMG display of 7 FDP display model

Fig.5-3b

EMG display of FDP display mode

(1) Transmit the code “59” from the Jig RCU.

The FDP shows the EMG content in the form of “E:**:**”.

(2) Transmit the code “59” from the Jig RCU again.

The FDP shows the EMG detail information <1> in the form

of “ *1: *2 : 34 ”.

(3) Transmit the code “59” from the Jig RCU once again.

The FDP shows the EMG detail information <2> in the form

of “ *5 : *6 : *7 ”.

(4) Transmit the code “59” from the Jig RCU once again.

The FDP shows the EMG detail information <3> in the form

of “*8 : *9 : *10”.

(5) Transmit the code “59” from the Jig RCU once again to re-

set the display.

5.3.2 Clearing the EMG history

(1) Display the EMG history.

(2) Transmit the code “36” from the Jig RCU.

(3) Reset the EMG display.

5.3.3 Details of the OSD display in the EMG display mode

During the EMG display, the OSD shows the data on the deck

mode, etc. The details of the display contents are as follows.

Notes:

• The display is variable depending on the part No. of the

System Control microcomputer (IC3001) built into the

VCR. In the following, refer to the figure carrying the

same two characters as the top two characters of the

part number of your IC.

• The sensor information in the OSD display contents is

partially different from the mechanism sensor informa-

tion in EMG detail information <1>.

[For MN* only]

disk tray hole

INITIAL MODE

DATA CODE

CUSTOM CODE

43: A CODE

[Data transmitting method]

Depress the " " ( 3 ) button

after the data code is set.

Jig RCU

0: 00

E: **

1E: **

1: *1

2: *2

3: 34

4: *5

5: *6

6: *7

7: *8

8: *9

9: *10

Normal display

EMG content display (Latest) See 5.3.4

EMG content display (Previous) See 5.3.4

EMG detail information <1> See 5.3.5

[Deck operation mode]

EMG detail information <1> See 5.3.5

[Mechanism operation mode]

EMG detail information <1> See 5.3.5

[Mechanism sensor information and Mechanism mode position]

EMG detail information <2> See 5.3.6

[Type of the cassette tape in use <1>]

EMG detail information <2> See 5.3.6

[Winding position of the cassette tape in use]

EMG detail information <2> See 5.3.6

[Type of the cassette tape in use <2> (Winding area)]

EMG detail information <3> See 5.3.7

[Previous deck operation mode]

EMG detail information <3> See 5.3.7

[The deck operation mode of the one before the last]

EMG detail information <3> See 5.3.7

[The deck operation mode of the one prior to one above]

*1 : Deck operation mode at the moment of EMG

*2 : Mechanism operation mode at the moment of EMG

3- : Mechanism sensor information at the moment of EMG

-4 : Mechanism mode position at the moment of EMG

*5 : Type of the cassette tape in use <1> .

*6 : Winding position of the cassette tape in use

*7 : Type of the cassette tape in use <2> (Winding area)

*8 : Previous deck operation mode at the moment of EMG

*9 : The deck operation mode of the one before the last at

the moment of EMG

*10: The deck operation mode of the one prior to one

above at the moment of EMG

<Example 1> E : 01

Latest EMG

No EMG record

<Example 2> E : - -

AA BB CC DD EE

FF GG HH I I J J

KK L L MM NN OO

PP QQ RR SS TT

UU VV WW XX YY

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC DR-MV1SUC Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info