Bedienungsanleitung JVC DR-MV5 (Seite 49 von 100) (Englisch)

56211

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Masterpage:Right+

EN 49

Filename [MV5S_09Advanced Operation.fm]

ADVANCED PLAYBACK

Page 49Wednesday, 31 August 2005 16:55

Marking Positions To Play Back Again Later

It is possible to mark positions (up to 999 points) where you want to

play back once again later, and start playback from a marked

position. Marking onto DVD-RAM/RW (VR mode only) discs when

recording is helpful to locate a start point when you play back the

discs later.

To mark positions:

During playback, press MARK at

positions you want to mark.

● “MARK” appears on the TV screen.

You can easily locate the marked

positions using 2 or 6 when you

play back the disc.

To delete the marked positions:

While paused, press 2 or 6 to

locate a marked position you want to

delete, then press MARK.

● Crossed “MARK” appears on the TV

screen, and the marked position is

deleted.

NOTES:

● When a monaural or bilingual programme changes to a stereo

programme while recording, a mark signal is automatically recorded.

● Titles will be divided into “chapters” at the marked points according to

the disc types as follows:

DVD-R/RW (Video mode): After finalising, titles are divided into

“chapters” at the marked points that are marked automatically

approximately every 5 minutes during recording before finalising.

(੬ pg. 90)

DVD-RW (VR mode): After finalising, titles are divided into “chapters”

at the marked points that are marked at the desired locations during

playback before finalising. (੬ pg. 90)

DVD-RAM: Titles are divided into “chapters” at the marked points that

are marked at the desired locations during playback.

DVD VIDEO and finalised disc: Creating of marked points are not

permitted.

Checking The Time Information

You can check time information of a disc on the front display panel

and the TV screen.

Each press of DISPLAY changes the display as follows:

8 DVD-RAM/DVD-R/DVD-RW

During recording

Current title elapsed time ] Disc remaining time* ] Clock time

(front display panel only) ] (back to the beginning)

* only discs before finalising

● Clock time is displayed only when a recordable disc is recorded.

During playback

Current title elapsed time ] Disc remaining time* ] Each title

elapsed time ] (back to the beginning)

* only discs before finalising

In stop mode or during playback

● It is possible to check disc remaining time according to recording

modes also by pressing REMAIN.

● In FR mode, it is possible to set recording time in detail. While the

recording mode and the disc remaining time are displayed by

pressing REMAIN, press rt to select “FR”, then press we to

select the desired recording time. (੬ pg. 62)

● It is not possible to switch the recording mode during playback or

while recording.

8 Video CD/Audio CD

During playback

Current track elapsed time ] Current track remaining time ] Total

elapsed time ] Total remaining time ] (back to the beginning)

In stop mode

0:00 ] Playback time of track 1 ] 0:00 ] Total length of a disc ]

(back to the beginning)

NOTE:

When a PBC-compatible Video CD disc is loaded, deactivate the PBC

function. (੬ pg. 50)

Angle Selection

You can enjoy a variety of scene angles if a DVD VIDEO disc

contains “multi-angle” parts, where the same scene was shot from

different angles.

If the disc contains “multi-angle” parts, “ ” appears on the TV

screen at the beginning of the “multi-angle” part.

1 Press ANGLE during playback.

The angle selection display

appears on the TV screen.

2 Press ANGLE or we to select

your desired angle.

● Each time you press ANGLE or

we, the angle changes.

● When “X” appears on the TV screen, the current scene is not

recorded from multiple angles. In addition, some discs prohibit angle

selection.

● To clear the angle selection display, press ENTER. In addition, the

angle selection display disappears automatically if no operation is

done for 10 seconds.

Subtitle Selection

Some DVD VIDEO discs contain more than one subtitle language,

from among which you can choose the desired subtitle language.

“ ” appears on the TV screen at the beginning of the part where

more than one subtitle language are recorded.

1 Press SUBTITLE during

playback. The subtitle selection

display appears on the TV screen.

● Each time you press SUBTITLE,

the subtitle display is switched on

and off.

2 Press we to select your desired language.

● To clear the subtitle selection display, press ENTER.

NOTES:

● When “X” appears on the TV screen, no subtitle language is

recorded.

● When the subtitle language won’t be changed with the procedure

above, change the subtitle on a disc menu displayed by pressing

MENU.

When 3 scene angles are

contained.

When 3 subtitle languages are

contained.

ENGLISH

MV5S_00.book Page 49 Wednesday, August 31, 2005 4:55 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC DR-MV5 Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC DR-MV5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info