Bedienungsanleitung JVC DR-MV5 (Seite 60 von 100) (Englisch)

56211

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Filename [MV5S_09Advanced Operation.fm]

Masterpage:Left+

60 EN

ADVANCED PLAYBACK

Page 60Wednesday, 31 August 2005 16:55

Next Function Memory

The Next Function Memory “tells” the unit what to do after

rewinding. Before continuing, make sure the unit is in the Stop

mode.

For Automatic Start Of Playback

Press 3, then press 4 within 2 seconds.

For Automatic Cassette Ejection

Press 3, then press x (EJECT) within 2 seconds.

Repeat Playback

Your unit can automatically play back the whole tape 100 times

repeatedly.

1 Press 4 to start playback.

2 Press and hold 4 for over 5 seconds, then release.

● “ ” lights up on the front display panel.

● After playing back a tape 100 times, the unit stops automatically.

3 Press 8 at any time to stop Repeat Playback.

● Pressing 4, 3, 5 or 9 also stops Repeat Playback.

Manual Tracking

Your unit is equipped with automatic tracking control. During

playback, you can override this and adjust the tracking manually by

pressing the PR buttons.

1 During playback, press PR + or – on the unit simultaneously to

activate manual tracking.

2 Press PR + or – to adjust the tracking manually.

● To return to automatic tracking, press PR + or – simultaneously

or eject and insert the tape again.

NOTE:

When a new tape is inserted, the unit enters the automatic tracking

mode automatically.

Soundtrack Selection

Your unit is capable of recording three soundtracks (HI-FI L, HI-

FI R and NORM) and will play back the one you select.

During Playback

Pressing AUDIO changes the soundtrack as follows:

NOTES:

● “HI FI L jhR” should normally be selected. In this mode, Hi-Fi

stereo tapes are played back in stereo, and the normal audio track is

played back automatically for tapes with only normal audio.

● For instructions on recording stereo and bilingual programmes, refer

to page 64.

● “SUPERIMPOSE” must be set to “AUTO” or the on-screen displays

will not appear. (੬ pg. 79)

VHS Progressive Scan

You can watch the images on VHS deck in the Progressive scan

mode via component video.

TTENTION:

● Your TV needs to be compatible with Progressive and to have

Component video input connectors.

● Make sure that there is no disc in the unit.

1 Set the Progressive-compatible TV to the component input

mode.

2 Press DVD so that the DVD lamp lights up on the unit.

3 Press PROGRESSIVE SCAN for 3 or more seconds.

● The video output indicator lights up on the front display panel.

4 Press VHS so that the VHS lamp lights up on the unit, then

press PROGRESSIVE SCAN.

● “]” lights up on the unit.

NOTES:

● Be sure to engage the DVD deck in stop mode.

● During still picture in VHS Progressive Scan mode, the images may

jitter, but this is not a malfunction.

TRACK

USE

On-Screen Display

HI FI

L j h R

For Hi-Fi stereo tapes

HI FI

L j

For main audio of Bilingual tapes

HI FI

h R

For sub audio of Bilingual tapes

NORM For audio-dubbed tapes

HI FI

NORM

For audio-dubbed tapes

MV5S_00.book Page 60 Wednesday, August 31, 2005 4:55 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC DR-MV5 Seite 60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC DR-MV5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info