Bedienungsanleitung JVC DR-MV5 (Seite 79 von 100) (Englisch)

56211

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Masterpage:Right+

EN 79

Filename [MV5S_13Subsidiary.fm]

SUBSIDIARY SETTINGS

Page 79Wednesday, 31 August 2005 16:55

RECORDING SET

8 SAVE AS LIBRARY — OFF / ON

When this function is set to “ON”, the recording information is

automatically stored in the library. For details, refer to “Modify

Library Information” (੬ pg. 71).

8 XP MODE REC AUDIO — DOLBY DIGITAL / LINEAR PCM

You can select the audio format when you record a title in XP

mode. When this function is set to “LINEAR PCM”, you can obtain

a high-quality audio sound.

DOLBY DIGITAL: To record in Dolby Digital format.

LINEAR PCM: To record in Linear PCM format.

8 AUDIO REC — NICAM 1/MAIN / NICAM 2/SUB / MONO

You can select the desired NICAM audio channel to be recorded

on a DVD-R/RW (Video mode) disc.

NICAM 1/MAIN: To record the main language of NICAM audio.

NICAM 2/SUB: To record the sub language of NICAM audio.

MONO: To record the standard (monaural) sound of NICAM audio.

NOTE:

This function works only for the NICAM bilingual programme.

8 DIRECT REC — OFF / ON

When this function is set to “ON”, you can easily start recording the

programme that you are watching on your TV. Press and hold 7

and press 4 on the remote control, or press 7 on the unit.

NOTES:

● When you use the Direct Rec function, be sure to use a TV offering

T-V LINK, etc. and connect a fully-wired 21-pin SCART cable

between the unit and the TV. (੬ pg. 15)

● If “DIRECT REC” is set to “OFF”, the 7 button functions as described

in “Basic Recording (DVD)” (੬ pg. 26) or “Basic Recording (VHS)”

(੬ pg. 28).

● During Direct Rec, “– –” appears on the front display panel.

● If a programme is recorded with the Direct Rec, the station name will

not be registered in the library. “––––” will be displayed for the

station name.

● Even if there is no power supply for more than 60 minutes, the unit

keeps the setting.

8 INPUT COLOUR SYSTEM — AUTO / PAL / SECAM

You can play back PAL discs, or record PAL and SECAM signals

on this unit. Select the appropriate colour system.

AUTO: Normally select “AUTO”. “AUTO” identifies the input signal

and automatically switches to an appropriate colour system.

When “AUTO” is not selected, you have to switch the colour

system to an appropriate setting (PAL or SECAM) manually.

PAL: To record PAL signals.

SECAM: To record SECAM signals.

DISPLAY SET

8 SUPERIMPOSE — OFF / AUTO

When this function is set to “AUTO”, various operational indicators

appear on the TV screen. Messages appear in the selected

language. (੬ pg. 20)

OFF: To turn off superimposed indications.

AUTO: To superimpose operational indications for approximately

five seconds just after the corresponding operation.

NOTES:

● Even when “SUPERIMPOSE” is set to “OFF”, you can display the

various operational indicators by pressing ON SCREEN. To clear the

operational indicators, press ON SCREEN again.

● When you use this unit as the source player for editing, be sure to set

“SUPERIMPOSE” to “OFF” before starting.

● When you select “AUTO”, during playback, the operation mode

indicators may be disturbed depending on the type of disc being

used.

8 GREY/BLUE BACK — OFF / ON

When this function is set to “ON”, the TV screen becomes all grey

(DVD deck)/blue (VHS deck) when receiving a channel not in use.

NOTE:

When you want to receive an unstable channel with poor signals, set

this function to “OFF”.

8 DIMMER — BRIGHT / DIMMED1 / DIMMED2 / OFF

You can change the brightness of the front display panel.

BRIGHT: To turn on the light on the front display panel. (Blue lamp

on the front display panel is turned on.)

DIMMED1/DIMMED2: To change the brightness level. (Blue lamp

on the front display panel is turned off.)

OFF: To turn off the light on the front display panel. (Blue lamp on

the front display panel is turned off.)

8 POWER SAVE — OFF / ON

When this function is set to “ON”, you can reduce the power

consumption while the unit is turned off.

● During Power Save mode —

— the front display panel will be turned off.

— the Just Clock function (

੬ pg. 88) does not work.

● Power Save does not work when —

— the unit is in the Timer mode.

— the unit’s power is turned off after timer-recording or Instant Timer

Recording.

— “L-2 SELECT” is set to “DECODER” or “SAT VIDEO/RGB”. (

੬ pg. 45)

● It takes some time for the unit to complete initialisation after you turn

on the unit power, with “HELLO” blinking on the front display panel.

8 ON SCREEN LANGUAGE

This unit offers you the choice to view on-screen messages in 10

different languages. Though Auto Set Up selects the language

automatically (੬ pg. 19), you can change the language setting

manually as required.

For details, refer to “On-screen Language Set (DVD Deck Only)”

(੬ pg. 20).

MV5S_00.book Page 79 Wednesday, August 31, 2005 4:55 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC DR-MV5 Seite 79

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC DR-MV5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info