Bedienungsanleitung JVC DRM10 (Seite 67 von 112) (Englisch)

20741

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

Masterpage:Right-No-Heading

EN 67

Filename [DR-M10U_08Recording.fm]

Page 67 January 26, 2004 11:08 am

Enter the recording stop time.

Press we to select “STOP”, then press rt repeatedly to

set the desired stop time.

● Each press of rt advances/goes back the stop time in 1-min.

increments.

● To advance/go back the stop time in 30-min. increments, press

and hold rt.

Enter the channel position.

Press we to select “CH”, then press rt repeatedly to

select the desired channel.

Set “DAILY/WEEKLY” option.

Refer to step E in “VCR Plus+

Timer Programing”

(

੬ pg. 60).

● It is necessary to set “DAILY/WEEKLY” option for On-Disc

Timer Programing. (

੬ pg. 61, “Daily/Weekly Rec Function”)

Set the other recording options as required.

Refer to step E in “VCR Plus+

Timer Programing”

(

੬ pg. 60).

● You can select XP, SP, LP, EP or FR480 mode for “REC

MODE”. You cannot select FR (JUST), FR60–FR360 and

FR420.

Access the confirmation screen.

Press ENTER.

Complete timer programing.

Press ENTER.

● To program another timer, repeat steps B – K.

To timer-record the program with the

programed disc

Load the disc.

A Press x to open the disc tray.

B Place the programed disc on the disc tray.

● For details, refer to “Placing a Disc” (੬ pg. 11).

C Press x to close the disc tray.

Engage the unit’s timer mode.

Press DVD 1. The unit turns off and “ ” appears

on the front display panel.

● To disengage the timer mode, press DVD 1 again.

NOTES:

● Even if On-Disc Timer Programing is overlapping with other

timer programing, any caution message does not appear. In

such a case, recording will be executed in the descending

order of the recording start time of the program.

● On-Disc Timer Programing is not possible on a DVD-RW disc

formatted in video mode. (

੬ pg. 101, “Format a DVD-RW

disc”)

● The information of a program recorded with On-Disc Timer

Programing is not stored in the library. (

੬ pg. 82)

● The play list is not created for the programs recorded with On-

Disc Timer Programing. (

੬ pg. 78)

● VCR Plus+ Timer Programing is not possible on the discs used

exclusively for On-Disc Timer Programing.

● Manual Timer Programing is not possible on the On-Disc

Timer Programed disc. (

੬ pg. 64)

● Basic Recording is not possible on the On-Disc Timer

Programed disc. (

੬ pg. 57)

● The On-Disc Timer Programing function does not work on the

unit form other manufactures even if the On-Disc Timer

Programed disc is loaded.

● The beginning of a program may not be recorded. Also, if the

1st program’s recording stop time and the 2nd program’s

recording start time is the same, the ending of the 1st program

may not be recorded.

● If there is a power cut while recording, the recordings before

the power cut are not guaranteed.

Cable Box or DBS Receiver Users

To timer-record a satellite broadcast using the On-Disc Timer

Programing function:

A Perform “Cable Box Control Setting” (

੬ pg. 29) or “DBS

Receiver Control Setting” (

੬ pg. 32).

B Perform “On-Disc Timer Programing”.

C Leave the Cable Box or DBS receiver’s power on.

DR-M10U_08Recording.fm Page 67 Monday, January 26, 2004 11:08 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC DRM10 Seite 67

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC DRM10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info