Bedienungsanleitung JVC DT-V17G25 (Seite 5 von 36) (Englisch)

660749

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Index of Parts and Functions

1 REMOTE terminal

Terminal for controlling the monitor by an external control

(+ “External Control” on page 20).

2 VIDEO terminals (BNC)

Input and output terminals for the composite signals.

3 COMPO. (Y, PB/B-Y, PR/R-Y) terminals (BNC)

Input terminals for the analog component (color difference) signal.

4 AUDIO ASSIGN (IN 1, IN 2) terminals (IN 1: pin jack, IN 2: Φ3.5mm)

Input terminals for the analog audio signals.

l Use this terminal for the analog audio connection of the SDI.

When a superimposed signal (EMBEDDED AUDIO signal on an

SDI signal) is input, analog audio signals cannot be input.

5 AUDIO ASSIGN (MONITOR OUT) terminals (pin jack)

Output terminals for the analog audio signal.

l The signal is output from this terminal only when the monitor is

on or in “Power Save” mode (+ “No Sync Action” on page 15).

l The EMBEDDED AUDIO signal...

– is decoded into an analog signal, then emitted.

– is emitted only when “SDI 1” or “SDI 2” is selected, and when

EMBEDDED AUDIO signals come in to the 3G/HD/SD SDI (IN 1

or IN 2) terminal.

l Audio signals are only output from the HDMI terminal when the

signals are not protected by HDCP.

– Even when the signals are protected by HDCP, sound is emitted

from the speakers.

6 3G/HD/SD SDI (IN 1, IN 2) terminals (BNC)

Input terminals for the 3G/HD/SD SDI signals.

l The terminals accept also EMBEDDED AUDIO signals including

up to 16 audio channels with a sampling frequency of 48 kHz.

l Use SDI IN 1 and SDI IN 2 terminal when selecting DUAL LINK

SDI for the input.

– Insert Link A into IN 1, and Link B into IN 2.

7 3G/HD/SD SDI (OUT 1, OUT 2: SWITCHED OUT) terminal (BNC)

Output terminal for the 3G/HD/SD SDI signals.

l For SDI OUT 1 output, the SDI IN1 signal is emitted.

l For SDI OUT 2 output, set the output signal in SDI2 OUT SEL of

the Main Menu (+ “Signal Setting” on page 12).

When an input other than SDI 1 and SDI 2 is selected, the SDI

signal of the input selected last time is emitted from this terminal.

l The signals are emitted from this terminal only when the

monitor is on or in “Power Save” (+ page 15) mode.

8 HDMI terminals

Input terminal for the HDMI signal compatible with HDCP.

Rear panel

9 Screw holes for external battery attachment (DT-V21G2/DT-

V17G2 only)

Attach external battery for DC power supply by using 2 screw

holes. Choose the appropriate screw holes from 1, 2 or 3 according

to the type of external battery. (Depending on the battery type.)

Use the Anton Bauer Dionic 90 (mount: QR DXC-M3A) external battery.

Caution:

Do not use the external battery for DC 24 V power supply.

Use only the battery specified above. If a heavy battery is used,

it may fall off depending on the way the monitor is used.

p DC switch (DT-V21G2/DT-V17G2 only)

Turns the DC power on or off.

l You need to press button (+ ; on page 7) on the front

panel to turn on the monitor after turning on the DC switch.

l The monitor consumes the battery even while the monitor is on

standby. To save battery life, turn off the DC switch.

q DC IN terminal (DT-V21G2/DT-V17G2 only)

DC 12 V (maximum DC 17 V) power input

connector.

When using DC 12 V power (maximum DC 17 V), check the

DC IN terminal pin signal, and use the correct polarity. If the

polarity is reversed, this could cause a fire or personal injury.

l While using both the AC and DC power supply, AC power

supply is preferentially used. If the AC power supply is cut off

(for example, when turning off the POWER switch), the power

supply automatically switches to the DC power supply.

Use a DC power supply with the LPS (Limited Power Sources) function.

w AC IN terminal

AC power input connector. Connect the provided AC power cord

to an AC outlet.

l Attach the provided power cord holder to prevent accidental

disconnection of the AC power cord. (+ page 24)

l Attach the provided core filter. (North America only) (+ page 24)

Caution: Do not connect the power cord until all other

connections are completed.

e POWER switch

Turns AC power on or off.

l You need to press button (+ ; on page 7) to use the

monitor after turning on the POWER switch.

Note for connections

• Beforemakinganyconnections,turnoffalltheequipment.

• Useacordwhoseplugscorrectlymatchtheterminalsonthismonitor

and the equipment.

• Plugsshouldbefirmlyinserted;poorconnectionscouldcausenoise.

• Whenunpluggingacord,besuretograspitsplugandpullitout.

• DONOTconnectthepowercorduntilallconnectionsarecomplete.

• Referalsototheusermanualofeachpieceofequipment.

Carry handle (DT-V21G2/DT-V17G2/

DT-V17G25 only)

Use this handle when carrying the monitor.

DT-V21G2/

DT-V17G2 only

Security slot

Attach a security wire to this slot.

The illustration of

the monitor is of

DT-V21G2.

DT-V24G2_EN.indb 5 2016/07/27 16:37:07

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC DT-V17G25 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC DT-V17G25

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info