Bedienungsanleitung JVC FSSD1000R (Seite 25 von 28) (Englisch)

29829

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Using the Timers

Setting the ON time (Example: 10:15).

1. Press the TIMER button on the Unit for more than

two seconds.

The Timer indicator lights up and the hour digit of the

current ON time blinks on the display.

• When the clock is not set, “CLOCK” and “ADJUST”

appear alternately on the display. Set the clock first.

Press the ¢ or 4 button on the Unit to set the

hour you want the Unit to come on.

Pressing the ¢ button moves the time forwards and

pressing the 4 button moves it backwards. Hold

down the button to move the time rapidly.

2. Press the TIMER button.

The minute digits of the ON time blink on the display.

Set the minute you want the Unit to come on, using

the ¢ or 4 button.

Setting the OFF time (Example: 13:30).

1. Press the TIMER button.

The hour digit of the OFF time blinks on the display.

(The same time as the ON time will be automatically

set.)

Set the hour you want the Unit to be turned off, using

the ¢ or 4 button.

2. Press the TIMER button.

The minute digits of the OFF time blink on the dis-

play.

Set the minute you want the Unit to be turned off, us-

ing the ¢ and 4 buttons.

Selecting the music source.

1. Press the TIMER button.

The “TUNER” or “CD” blinks on the display.

2. Press the ¢ or 4 button to select the music

source you want to listen to.

The display changes as shown below.

TUNER

(back to the beginning)

Setting the volume level.

1. Press the TIMER button.

The current volume setting blinks on the display.

2. Press the ¢ or 4 button to select the volume level.

-- :The current volume level will be used.

0 to 50 :When the timer is turned on, the Volume

will be automatically set to the selected

level.

Press the TIMER button.

The timer setting is completed and the display returns to

the display before you set the Timer. The Timer indica-

tor remains lit.

Before turning off the System, prepare

the music source selected in step 3.

TUNER: Tune in to the desired station.

CD: Insert a CD. (Playback will start from the first

track at Timer on.)

Press the

button to turn off the Sys-

tem.

In standby mode, you can see the Timer indicator ( )

on the display.

• When the timer turns on, the Timer indicator starts

blinking and the prepared source in step 6 will be

played.

To cancel the timer,

press the TIMER button. The

Timer indicator ( ) goes out on the display.

To re-activate the cancelled timer

, press the TIM-

ER button to light the Timer indicator ( ).

At this time, you can see the current timer settings. Each

setting appears on the display for two seconds in the or-

der of ON time, OFF time, music source and volume.

To change the timer setting,

repeat the setting pro-

cedure from the beginning.

CAUTION:

• If the System is unplugged, or a power fail-

ure occurs, the timer setting will be lost.

You will need to reset the clock first, then

the timer.

FS-SD1000R(B)E.book Page 22 Thursday, March 29, 2001 1:38 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC FSSD1000R Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC FSSD1000R

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info