Bedienungsanleitung JVC GD-V4210PCE (Seite 32 von 40) (Englisch)

40064

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

• When performing simultaneous or individual operation,

use the remote control.

MENU/EXIT

MODE

ID +/–

2 / 3

5 /

DISPLAY ASPECT POWER

RGB

COMPO.

VIDEO B

VOLUME

MULTIPLE

MODE ID SET

MONITOR ADJUSTMENT

VIDEO A

MUTING

MENU/EXIT

RM-C575 REMOTE CONTROL UNIT

Operating the Monitors Simultaneously

• Check that no ID number is shown on the screens. If any ID

numbers are shown, press MODE to erase them.

• The following procedure should be performed slowly and

securely.

Example: When adjusting “CONTRAST”:

Press MENU/EXIT to display the Main

Menu.

The Main Menus appear on all the connected Monitors’

screens.

Press 5/∞ to move the cursor (3) to

“PICTURE ADJ.”

Press 3 to display the Picture

Adjustment Menu.

The Picture Adjustment Menus appear on all the

connected Monitors’ screens.

Press 5/∞ to move the cursor (3) to

“CONTRAST.”

Press 2/3 to make an adjustment.

At this time, if the Monitors have different

“CONTRAST” settings, the adjustment is made, based

on the different settings.

Press MENU/EXIT twice to exit from the

menu operations.

Operating the Monitors Individually

The following procedure should be performed slowly and

securely.

Press MODE to display the ID numbers

on all the connected Monitors’ screens.

Press ID +/– to select the Monitor you

want to operate.

Example: To select “[02]”:

Press ID + twice.

Slave 2’s ID number “[02]” is highlighted.

* The selected ID number will be also shown on the

Master Monitor (in this example, “MASTER\[02]”).

Perform any desired operations, such as

adjusting menu items.

Notes:

• If “[00]” is displayed on all the Monitor screens or if some of

the Monitor screens have no indication in step 1, press

MODE to turn off the indications on all screens, and then

press MODE again.

• If the ID number of the Monitor selected in step 2 is not

highlighted or if the ID numbers of more than one Monitor

are highlighted, press MODE to clear the ID numbers, and

then start the procedure again from the beginning.

CONTRAST

BRIGHT

CHROMA

PHASE

SHARPNESS

sub menu

reset

ADJUST:

PICTURE ADJ.

SELECT:

EXIT:

VIDEO A

: –01

: –02

CONTRAST

BRIGHT

CHROMA

PHASE

SHARPNESS

sub menu

reset

ADJUST:

PICTURE ADJ.

SELECT:

EXIT:

VIDEO A

: +01

: –02

CONTRAST

BRIGHT

CHROMA

PHASE

SHARPNESS

sub menu

reset

ADJUST:

PICTURE ADJ.

SELECT:

EXIT:

VIDEO A

: –02

CONTRAST

BRIGHT

CHROMA

PHASE

SHARPNESS

sub menu

reset

ADJUST:

PICTURE ADJ.

SELECT:

EXIT:

VIDEO A

: +02

: –02

When pressing 3 once

Slave 2

Master

Slave 1

Slave XX

MASTER

[00] [00] [00]

Serial Connections and Operations (Continued)

Slave 2

Master

Slave 1

Slave XX

MASTER\[02]

[01] [02] [XX]

31-40.GD-V4210PZW[EN]/f 00.9.29, 5:56 PM32

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GD-V4210PCE Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info