Bedienungsanleitung JVC GD-V4210PZW (Seite 21 von 40) (Englisch)

40062

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

ENGLISH

Changing the Aspect Ratio

The setting adjusted applies to all inputs.

• You can change the aspect ratio by pressing ASPECT. (See

page 15.)

Press MENU/EXIT (or MENU on the

Monitor) to display the Main Menu.

Press 5/∞ to move the cursor (3) to

“FUNCTION SELECT.”

Press 3 to display the Function

Selection Menu.

* “PICTURE MODE” and “SIGNAL MODE” do not

appear at the same time.

“PICTURE MODE” appears when RGB input is

selected, and one of the following signals comes in —

RGB15K-50, RGB15K-60, PC98, VGA480-60, SVGA-56,

SVGA-60, and XGA-60. On the other hand, “SIGNAL

MODE” appears when VIDEO A, VIDEO B, or COMP.

(component) input is selected.

Press 5/∞ to move the cursor (3) to

“ASPECT.”

Press 2/3 to select an aspect ratio you

want.

Each time you press the button, the aspect ratio changes

as follows:

* For detailed information on these aspect ratios, see

page 15.

Press MENU/EXIT (or MENU on the

Monitor) twice to exit from the menu

operations.

Note:

• When one of the following signals is being input, you

cannot select the aspect ratio you want.

■ 1080i, 1035i or 720p signal through the COMPONENT input

terminals

You can only select FULL.

■ 480p signal through the COMPONENT input terminals

You cannot select PANORAMIC.

■ When any signal other than RGB15K-60 and RGB15K-50

through the RGB input terminals

You can select only REGULAR and FULL.

Changing the Picture Mode

When one of the following signals comes in through the RGB

terminals — RGB15K-50, RGB15K-60, PC98, VGA480-60,

SVGA-56, SVGA-60, and XGA-60, you can select the picture

mode suited to either still pictures or moving pictures.

Press MENU/EXIT (or MENU on the

Monitor) to display the Main Menu.

Press 5/∞ to move the cursor (3) to

“FUNCTION SELECT.”

Press 3 to display the Function

Selection Menu.

* “PICTURE MODE” and “SIGNAL MODE” do not

appear at the same time.

“PICTURE MODE” appears when RGB input is

selected, and one of the following signals comes in —

RGB15K-50, RGB15K-60, PC98, VGA480-60, SVGA-56,

SVGA-60, and XGA-60. On the other hand, “SIGNAL

MODE” appears when VIDEO A, VIDEO B, or COMP.

(component) input is selected.

Press 5/∞ to move the cursor (3) to

“PICTURE MODE.”

Press 2/3 to select the picture mode

you want.

Each time you press the button, the picture mode

alternates between “STILL” and “MOVING.”

Selects the picture quality suited to either the still picture

or the moving picture.

STILL: When showing the still pictures mainly on the

screen.

MOVING: When showing the moving pictures mainly on

the screen.

Press MENU/EXIT (or MENU on the

Monitor) twice to exit from the menu

operations.

Cursor (3)

PICTURE ADJ.

SIZE/POSITION ADJ.

FUNCTION SELECT

STATUS DISPLAY

ENTER:

MAIN MENU

SELECT:

EXIT:

COLOR TEMP.

PICTURE MODE

ASPECT

SIGNAL MODE

RGB INPUT

reset

FUNCTION SELECT

ADJUST:

SELECT:

EXIT:

: HIGH

: STILL

: PANORAMA

: AUTO

: A

Cursor (3)

PICTURE ADJ.

SIZE/POSITION ADJ.

FUNCTION SELECT

STATUS DISPLAY

ENTER:

MAIN MENU

SELECT:

EXIT:

REGULAR FULL

ZOOMPANORAMIC

COLOR TEMP.

PICTURE MODE

ASPECT

SIGNAL MODE

RGB INPUT

reset

FUNCTION SELECT

ADJUST:

SELECT:

EXIT:

: HIGH

: STILL

: PANORAMA

: AUTO

: A

14-23.GD-V4210PZW[EN]/f 00.9.29, 5:55 PM21

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GD-V4210PZW Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info