Bedienungsanleitung JVC GR-AX210 (Seite 27 von 52) (Englisch)

595768

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Animation

Give stationary scenes or objects an illusion of

movement. This function allows you to shoot a

series of pictures, each slightly different, of the same

object for a brief period of time.

NOTE:

You need the optional RM-V20U remote control

unit to perform the following procedure.

ENGAGE RECORD–STANDBY

MODE

Make sure the lens cover is open, then set the

power switch to CAMERA.

SET RECORDING SPEED

Set SP/EP to SP (Z pg. 11).

SET RECORDING TIME

Press REC TIME on the remote control. Three

choices are available, and they appear in the

following order (each time REC TIME is

pressed): 1/4S (one-fourth of a second), 1/2S

(one-half of a second) and 1S (one full second).

Press again to release the animation mode.

START RECORDING

Press Recording Start/Stop after focusing on the

subject. The recording stops automatically after

the selected period of time.

ASSEMBLE SERIES OF

PICTURES

Repeat steps 3 and 4 for the desired number of

pictures.

CHECK YOUR WORK

Play back the series of pictures to see if the

results were satisfactory.

RELEASE ANIMATION MODE

Press REC TIME until “ ” disappears from the

viewfinder.

NOTES:

●

For best results, make sure the camcorder is

secured when shooting.

●

If the PROGRAM AE dial is set to Self-Timer

mode, Animation is cancelled and Self-Timer

mode is engaged with 15S selected.

●

Fade-in/out cannot be performed during

Animation shooting.

Time-Lapse

You can record sequentially at preset time spans.

Leaving the camcorder aimed at a specific subject,

you can record subtle changes over an extended

period of time.

NOTE:

You need the optional RM-V20U remote control

unit to perform the following procedure.

ENGAGE RECORD–STANDBY

MODE

Make sure the lens cover is open, then set the

power switch to CAMERA.

SET RECORDING SPEED

Set SP/EP to SP (Z pg. 11).

SET RECORDING TIME

Press REC TIME on the remote control. There

are three choices available, and they appear in

the following order (each time REC TIME is

pressed): 1/4S, 1/2S and 1S. Press again to

reset.

SET INTERVAL BETWEEN

RECORDINGS

Press INTERVAL on the remote control. There

are four choices available, and they appear in

the following order (each time INTERVAL is

pressed): 15S, 30S, 1MIN, and 5MIN. Press

again to reset.

START TIME-LAPSE

RECORDING

Press Recording Start/Stop. Recording and

intervals alternate automatically.

RELEASE TIME-LAPSE MODE

To release when the tally lamp is not blinking,

press INTERVAL and REC TIME repeatedly

until “ ” and “ ” disappear. To release

when the tally lamp is blinking, press

Recording Start/Stop to stop the blinking, then

press INTERVAL and REC TIME repeatedly

until “ ” and “ ” disappear.

NOTES:

●

Fade-in/out cannot be performed during

Time-Lapse shooting.

●

For best results, keep the camcorder secured

while shooting.

●

If, during steps 3 and 4, the PROGRAM AE dial is

set to the Self-Timer mode, the Self-Timer mode is

engaged with 15S selected.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-AX210 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info