Bedienungsanleitung JVC GR-D200 (Seite 52 von 88) (Englisch)

23033

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

# #

# 





ENEN

Master Page: Left-Heading0

DUBBING

* Connect when your TV/VCR has S-VIDEO IN

and A/V input connectors. In this case, it is not

necessary to connect the yellow video cable.

** Connect when your TV/VCR has only A/V input

connectors.

To use this camcorder as a player...

Following the illustrations, connect the

camcorder and the VCR. Also refer to page 22.

Set the camcorder’s VIDEO/MEMORY Switch to

“VIDEO”.

Set the camcorder’s Power Switch to “PLAY”

while pressing down the Lock Button located on

the switch.

Turn on the VCR’s power.

Insert the source cassette in the camcorder.

Insert the recording cassette in the VCR.

Engage the VCR’s AUX and Record-Pause

modes.

● Refer to the instruction manual for the VCR.

Press PLAY (4/9) on the camcorder to start

playback of the source tape.

At the point you want to start dubbing, engage

the VCR’s Record mode.

To pause dubbing, engage the VCR’s Record-

Pause mode and press PLAY (4/9) on the

camcorder.

Repeat steps 8 – 10 for additional editing. Stop

the VCR and camcorder.

NOTES:

●

●●

● It is recommended to use the AC Adapter as the

power supply instead of the battery pack.

(੬

੬੬

੬ pg. 11)

● As the camcorder starts to play your footage, it will

appear on your TV. This will confirm the

connections and the AUX channel for dubbing

purposes.

● Before you start dubbing, make sure that the

indications do not appear on the connected TV. If

they do, they are being recorded onto the new

tape.

To choose whether or not the following displays

appear on the connected TV...

• Date/time

Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.

(੬ pg. 31, 41) Or, press DISPLAY on the remote

control to turn on/off the date indication.

• Time code

Set “TIME CODE” to “OFF” or “ON”.

(੬ pg. 31, 41)

• Indications other than date/time and time code

Set “ON SCREEN” to “OFF”, “LCD” or “LCD/

TV”. (੬ pg. 31, 41)

To use this camcorder as a recorder...

1) Perform steps 1 to 3 in the left column.

2) Set “S/AV INPUT” to “A/V. IN” or “S. IN”.

(੬ pg. 31, 40)

3) Set “REC MODE” to “SP” or “LP”. (੬ pg. 31, 34)

4) Insert the recording cassette in this camcorder.

5) Press the Recording Start/Stop Button to engage

the Record-Pause mode. The “” or

“” indication appears on the screen.

6) Press the Recording Start/Stop Button to start

recording. The indication rotates.

7) Press the Recording Start/Stop Button again to

stop recording. The indication stops rotating.

NOTES:

● After dubbing, set “S/AV INPUT” back to “OFF”.

● Analog signals can be converted to digital signals

with this procedure.

● It is also possible to dub from another camcorder.

Dubbing To Or From A VCR

VCR

A Not connected

B Black to S-VIDEO IN*

C Yellow to VIDEO IN**

D White to AUDIO L IN

E Red to AUDIO R IN

BCD

S/AV/Editing cable

(provided)

To S/ AV

A/V

GR-D200US.book Page 52 Friday, April 11, 2003 1:05 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-D200 Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-D200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info