Bedienungsanleitung JVC GR-D201 (Seite 30 von 88) (Englisch)

663421

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

!

!!

!





ENEN

Master Page: Left

To Print By Selecting Still Images And Number

Of Prints

Perform steps 1 – 8 in “To Print All Still Images

(One Print For Each)” (墌 pg. 29).

Press + or – to select

“CURRENT”, and press

SELECT/SET. The DPOF

screen appears.

Press REW (3) or FF

(5) to select the desired

file.

Press + or – to select the number indication (00),

and press SELECT/SET.

Select the number of prints

by pressing + to increase

number, or – to decrease

the number, and press

SELECT/SET.

● Repeat steps 3 through 5

for the desired number

of prints.

● The number of prints can be set up to 15.

● To correct the number of prints, select the

image again and change the number.

Press + or – to select

“RETURN”, and press

SELECT/SET. The “SAVE?”

appears.

● If you did not change

any settings in step 3

through 5, the Menu

Screen reappears.

Press + or – to select “EXECUTE” to save the

setting you have just made, and press SELECT/

SET.

● To cancel selection, select “CANCEL”.

To Reset The Number Of Prints

1 Perform steps 1 – 8 in “To Print All Still Images

(One Print For Each)” (墌 pg. 29).

Press + or – to select “RESET”, and press SELECT/

SET. The DPOF screen appears.

Press + or – to select “EXECUTE”, and press

SELECT/SET. The normal playback screen

appears.

● To cancel selection, select “RETURN”.

● The number of prints is reset to 0 for all still

images.

You can initialize a memory card anytime.

After initializing, all files and data stored in the

memory card, including those which have been

protected, are cleared.

Set the VIDEO/MEMORY Switch to “MEMORY”.

Set the Power Switch to “PLAY” while pressing

down the Lock Button located on the switch.

Open the LCD monitor fully, or pull out the

viewfinder fully.

Press MENU. The Menu

Screen appears.

Press + or – to select

“FORMAT”, and press

SELECT/SET. The FORMAT

screen appears.

Press + or – to select

“EXECUTE”, and press

SELECT/SET. The memory

card is initialized.

● When initialization is finished, “NO IMAGES

STORED” or “NO E-MAIL CLIP STORED”

appears.

● To cancel initialization, select “RETURN”.

CAUTION:

While performing the above, never disconnect

power, as this may cause the memory card to be

corrupted.

RETURN

SHEETS

DPOF

SHEETS

DPOF

EXECUTE

SAVE?

CANCE L

Initializing A Memory Card

CAUTION:

Do not perform any other operation (such as

turning off the camcorder) during initialization.

Also, be sure to use the provided AC Adapter, as

the memory card may be corrupted if the battery

becomes exhausted during initialization. If the

memory card becomes corrupted initialize it.

DISPLAY

END

PROTECT

DELETE

DPOF

NO . RES E T

FORMAT

ORMA TF

EXECUTE

DATA?EX I ST I NG

ERASE ALL

RETURN

D.S.C. PLAYBACK (cont.)

GR-D200US.book Page 30 Friday, April 11, 2003 1:05 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-D201 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-D201

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info