Bedienungsanleitung JVC GR-D201 (Seite 37 von 88) (Englisch)

663421

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

ENEN





!%

!%!%

Master Page: Right

Wide mode

WIDE MODE (Factory-preset: OFF)

OFF: Records with no change in the screen ratio.

For playback on a TV with a normal screen ratio.

CINEMA

* : Inserts black bands at the top and

bottom of the screen. The indicator appears.

During playback on wide-screen TVs, the black

bands at the top and bottom of the screen are cut

and the screen ratio becomes 16:9. When using

this mode, refer to your wide-screen TV’s

instruction manual. During playback/recording on

4:3 TVs/LCD monitor/viewfinder, black bands are

inserted at the top and bottom of the screen and

the image appears like a letter boxed 16:9 movie.

SQUEEZE* : For playback on TVs with an

aspect ratio of 16:9. Naturally expands the image

to fit the screen without distortion. The

indicator appears. When using this mode, refer to

your wide-screen TV’s instruction manual. During

playback/recording on 4:3 TVs/LCD monitor/

viewfinder, the image is elongated vertically.

D.WIDE* : The indicator appears. The

zoom range is extended beyond the maximum

optical zoom wide angle range. This mode’s wide

angle setting is equivalent to using a 0.7X wide

conversion lens. Zooming is possible from 0.7X to

10X. This mode is suitable for shooting in a small

room.

* Available only when the VIDEO/MEMORY

Switch is set to “VIDEO”.

Wind cut

WIND CUT (Factory-preset: OFF)

OFF: Disengages the function.

ON : Helps cut down on noise created by

wind. The “ ” indicator appears. The quality of

the sound will change. This is normal.

Snapshot flash

FLASH (Factory-preset: AUTO)

OFF: Will not fire.

AUTO: Fires automatically if it is dark (

appears).

AUTO C: Fires automatically if it is dark (

appears) and reduces the Red-Eye effect in the

subject’s eyes.

ON: Always fires.

For details, refer to “Snapshot Flash” (墌 pg. 43).

Flash brightness adjustment

FLASH ADJ. (Factory-preset: ±0)

For details, refer to “Flash Brightness Adjustment”

(墌 pg. 43).

SYSTEM

Beep, melody and shutter sound

BEEP (Factory-preset: MELODY)

OFF: Even though not heard while shooting,

shutter sound is recorded on the tape.

BEEP: The beep sounds when the power is turned

on or off, and at the beginning and end of

recording. It also activates the shutter sound

effect. (墌 pg. 23, 42)

MELODY: Instead of a beep, a melody sounds

when any operation is performed. It also activates

the shutter sound effect. (墌 pg. 23, 42)

Tally lamp setting

TALLY (Factory-preset: ON)

OFF: The tally lamp remains off at all times.

ON: The tally lamp comes on to signal the start of

recording.

Remote control setting

For details, refer to “USING THE REMOTE

CONTROL UNIT” (墌 pg. 56).

REMOTE (Factory-preset: ON)

OFF: Disables the remote control operations.

ON: Enables the remote control operations.

System Menu

ADVANCED FEATURES

CONTINUED ON NEXT PAGE

GR-D200US.book Page 37 Saturday, April 26, 2003 2:11 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-D201 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-D201

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info