Bedienungsanleitung JVC GR-D23 (Seite 35 von 56) (Englisch)

56727

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

ADVANCED FEATURES

EN 35

MasterPage: Advan_Heading0_Right

EDITING

NOTE:

Dubbing from a VCR is possible with GR-D93/73/53 only.

A White to AUDIO L IN or OUT

B Red to AUDIO R IN or OUT

C Yellow to VIDEO IN or OUT

D To S-VIDEO IN or OUT**

* If your VCR has a SCART connector, use the provided

cable adapter. (The provided cable adapter accepts only

output signals from this camcorder. To use this camcorder

as a recorder, use a commercially available cable

adapter.)

** Connect when your TV/VCR has an S-VIDEO IN/OUT

connector. In this case, it is not necessary to connect the

yellow video cable.

NOTE:

Set the video out select switch of the cable adapter as

required:

Y/C: When connecting to a TV or VCR which accepts Y/

C signals and uses an S-Video cable.

CVBS: When connecting to a TV or VCR which does not

accept Y/C signals and uses an audio/video cable.

To use this camcorder as a player

1 Following the illustrations, connect the camcorder and

the VCR. Also refer to page 17.

2 Set the camcorder’s VIDEO/MEMORY Switch to

“VIDEO”. (GR-D93/73 only)

3 Set the camcorder’s Power Switch to “PLAY” while

pressing down the Lock Button located on the switch.

4 Turn on the VCR’s power.

5 Insert the source cassette in the camcorder.

6 Insert the recording cassette in the VCR.

7 Engage the VCR’s AUX and Record-Pause modes.

● Refer to the instruction manual for the VCR.

8 Press 4/9 on the camcorder to start playback of the

source tape.

9 At the point you want to start dubbing, engage the

VCR’s Record mode.

10 To pause dubbing, engage the VCR’s Record-

Pause mode and press 4/9 on the camcorder.

11 Repeat steps 8 – 10 for additional editing. Stop the

VCR and camcorder.

NOTES:

● It is recommended to use the AC Adapter as the power

supply instead of the battery pack. (੬ pg. 7)

● As the camcorder starts to play your footage, it will appear

on your TV. This will confirm the connections and the AUX

channel for dubbing purposes.

● Before you start dubbing, make sure that the indications do

not appear on the connected TV. If they do, they are being

recorded onto the new tape.

To choose whether or not the following displays appear

on the connected TV

• Date/time

Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.

(੬ pg. 24, 28) Or, press DISPLAY on the remote control

(provided with GR-D93/73/53 only) to turn on/off the date

indication.

• Time code

Set “TIME CODE” to “OFF” or “ON”. (੬ pg. 24, 28)

• Indications other than date/time and time code

Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”.

(੬ pg. 24, 28)

Dubbing To Or From A VCR

1234

VCR

Audio/Video

cable

(provided)

To AV To S

S-Video cable

(optional)

To TV or VCR

“Y/C”/“CVBS” Video

Out Select Switch

Cable Adapter*

CONTINUED ON NEXT PAGE

GR-D93PAL.book Page 35 Wednesday, October 29, 2003 9:36 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-D23 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-D23

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info