Bedienungsanleitung JVC gr-d239 (Seite 20 von 48) (Englisch)

291258

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

20 EN

MasterPage: Left

VIDEO PLAYBACK

1 Load a cassette. (੬ pg. 16)

2 Set the Power Switch to “PLAY” while

pressing down the Lock Button located on the

switch.

3 To start playback, press 4/9.

4 To stop playback, press 8.

● During Stop mode, press 3 to rewind, or 5

to fast-forward the tape.

To control the speaker volume

Slide the Power Zoom Lever (VOL. +/–) towards

“+” to turn up the volume, or towards “–” to turn

down the volume.

NOTES:

● The playback picture can be viewed in the LCD

monitor, viewfinder or on a connected TV.

(੬ pg. 21)

● If Stop mode continues for 5 minutes when power

is supplied from a battery, the camcorder shuts off

automatically. To turn on again, set the Power

Switch to “OFF”, then to “PLAY”.

● When a cable is connected to the S/AV connector,

the sound is not heard from the speaker.

Still Playback

Pauses during video playback.

1) Press 4/9 during playback.

2) To resume normal playback, press 4/9

again.

● If still playback continues for more than about

3 minutes, the camcorder’s Stop mode is

automatically engaged.

Shuttle Search

Allows high-speed search in either direction

during video playback.

1) During playback, press 5 for forward

search, or 3 for reverse search.

2) To resume normal playback, press 4/9.

● During playback, press and hold 5 or 3. The

search continues as long as you hold the button.

Once you release the button, normal playback

resumes.

● A slight mosaic effect appears on the display

during Shuttle Search. This is not a malfunction.

TTENTION:

During Shuttle Search, parts

of the picture may not be

clearly visible, particularly on

the left side of the screen.

Blank Search

Helps you find where you should start recording

in the middle of a tape to avoid time code

interruption. (੬ pg. 19)

1 Load a cassette. (੬ pg. 16)

2 Set the Power Switch to “PLAY” while

pressing down the Lock Button located on the

switch.

3 Press MENU. The Menu Screen appears.

4 Press MENU to select “t”. The VIDEO

Menu appears.

5 Press + or – to select “BLANK SRCH”, and

press MENU. The Sub Menu appears.

6 Press + or – to select “EXECUTE”, and press

MENU.

● The “BLANK SEARCH” indication appears and

the camcorder automatically starts reverse or

forward search, then stops at the spot which is

about 3 seconds of tape before the beginning of

the detected blank portion.

● To cancel Blank Search midway, press 8.

NOTES:

● Before starting Blank Search, if the current

position is at a blank portion, the camcorder

searches in the reverse direction. If the current

position is at a recorded portion, the camcorder

searches in the forward direction.

● If the beginning or end of the tape is reached

during Blank Search, the camcorder stops

automatically.

● A blank portion which is shorter than 5 seconds of

tape may not be detected.

Normal Playback

Speaker

4/9

Lock Button

Power

Switch

5 VOL. +/–

GR-D239AH.book Page 20 Friday, July 1, 2005 10:30 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC gr-d239 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC gr-d239

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info