Bedienungsanleitung JVC GR-D31 (Seite 35 von 48) (Englisch)

533229

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

TROUBLESHOOTING

The image looks like the shutter speed is too

slow.

• When shooting in the dark, the unit becomes highly

sensitive to light when “GAIN UP” is set to “AUTO” in

the Menu Screen.

¥ If you want the lighting to look more natural, set

“GAIN UP” to “AGC” or “OFF” in the Menu Screen

(੬ pg. 22).

White Balance cannot be activated.

• The Sepia or Monotone mode is activated.

¥ Turn off Sepia or Monotone before setting White

Balance (੬ pg. 16, 20).

When shooting a subject illuminated by bright

light, vertical lines appear.

• This is a result of exceedingly high contrast, and is

not a malfunction.

When the screen is under direct sunlight

during shooting, the screen becomes red or

black for an instant.

• This is not a malfunction.

The date/time does not appear.

•“DATE/TIME” is set to “OFF” in the Menu Screen.

¥ Set “DATE/TIME” to “ON” in the Menu Screen

(੬ pg. 23, 25).

Time code does not appear.

•“TIME CODE” is set to “OFF” in the Menu Screen.

¥ Set “TIME CODE” to “ON” in the Menu Screen

(੬ pg. 24, 25).

Images on the LCD monitor appear dark or

whitish.

• In places subject to low temperature, images become

dark due to the characteristics of the LCD monitor.

When this happens, the displayed colours differ from

those that are actually recorded. This is not a defect of

the camcorder.

• When the LCD monitor's fluorescent light reaches the

end of its service life, images on the LCD monitor

become dark. Consult your nearest JVC dealer.

¥ Adjust the brightness and angle of the LCD monitor

(੬ pg. 11).

The rear of the LCD monitor is hot.

• The light used to illuminate the LCD monitor causes it

to become hot.

¥ Close the LCD monitor to turn it off or set the Power

Switch y to “OFF (CHARGE)”, and let the unit cool

down.

The indicators and the image colour on the

LCD monitor are not clear.

• This may occur when the surface or the edge of the

LCD monitor is pressed.

The LCD monitor or viewfinder indications

blink.

• Certain Fade/Wipe effects, certain modes of

Programme AE with special effects, “DIS” and other

functions that cannot be used together are selected at

the same time.

¥ Re-read the sections covering Fade/Wipe effects,

Programme AE with special effects and “DIS”

(੬ pg. 16, 17, 22).

Coloured bright spots appear all over the LCD

monitor or the viewfinder.

• The LCD monitor and the viewfinder are made with

high-precision technology. However, black spots or

bright spots of light (red, green or blue) may appear

constantly on the LCD monitor or the viewfinder.

These spots are not recorded on the tape. This is not

due to any defect of the unit. (Effective dots: more

than 99.99 %)

During recording, sound cannot be heard.

• This is normal.

Play, Rewind and Fast-Forward functions do

not work.

• The Power Switch y is set to “ ” or “ ”.

¥ Set the Power Switch y to “PLAY” (੬ pg. 13).

GR-D31/21EK 34-48_Japan 02.12.19, 9:14 PM35

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-D31 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info