Bedienungsanleitung JVC GR-D350AG (Seite 36 von 44) (Englisch)

57093

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

TROUBLESHOOTING

36 EN

MasterPage: Left

● The light source or the subject does not include

white. Or there are various different light sources

behind the subject.

➜ Find a white subject and compose your shot so

that it also appears in the frame. (੬ pg. 26)

● Shooting was performed under backlit conditions.

➜ Press BACKLIGHT. (੬ pg. 28)

● The “Program AE” subject is too bright.

➜ Set to “SPOTLIGHT”. (੬ pg. 31)

● The Sepia (SEPIA) or Monotone (MONOTONE)

mode is activated.

➜ Disengage the Sepia (SEPIA) or Monotone

(MONOTONE) mode before setting White

Balance. (੬ pg. 31)

● When shooting in the dark, the unit becomes

highly sensitive to light when “GAIN UP” is set to

“AUTO”.

➜ If you want the lighting to look more natural, set

“GAIN UP” to “AGC” or “OFF”. (੬ pg. 22, 23)

Other problems

● Charging is difﬁcult in places subject to extremely

high/low temperatures.

➜ To protect the battery, it is recommended to

charge it in places with a temperature of 10°C to

35°C. (੬ pg. 39)

● The battery pack is not attached ﬁrmly.

➜ Detach the battery pack once again and re-attach

it ﬁrmly. (੬ pg. 12)

● The date/time is not set.

➜ Set the date/time. (੬ pg. 15)

● The built-in clock battery has run out and the

previously set date/time has been erased.

➜ Consult your nearest JVC dealer for replacement.

● This is not a malfunction.

➜ By recording with “DIS” de-activated

(੬ pg. 22, 23) this can be avoided.

● The DV cable was plugged/unplugged with power

turned on.

➜ Turn the camcorder’s power off and on again,

then operate it.

● In places subject to low temperature, images

become dark due to the characteristics of the

LCD monitor. This is not a malfunction.

➜ Adjust the brightness and angle of the LCD

monitor. (੬ pg. 15, 17)

● When the LCD monitor’s ﬂuorescent light reaches

the end of its service life, images on the LCD

monitor become dark.

➜ Consult your nearest JVC dealer.

● The LCD monitor and the viewﬁnder are made

with high-precision technology. However, black

spots or bright spots of light (red, green or blue)

may appear constantly on the LCD monitor or the

viewﬁnder. These spots are not recorded on the

tape. This is not due to any defect of the unit.

(Effective dots: more than 99.99 %)

● The battery’s charge is low.

➜ Install a fully charged battery. (੬ pg. 12)

The colour of Snapshot looks strange.

The image taken using Snapshot is too

dark.

The image taken using Snapshot is too

bright.

White Balance cannot be activated.

The image looks like the shutter speed is

too slow.

The POWER/CHARGE lamp on the

camcorder does not light during charging.

“SET DATE/TIME!” appears.

When the image is printed from the printer,

a black bar appears at the bottom of the

screen.

When the camcorder is connected via the

DV connector, the camcorder does not

operate.

Images on the LCD monitor appear dark or

whitish.

Coloured bright spots appear all over the

LCD monitor or the viewﬁnder.

The cassette will not load properly.

GR-D350AG_EN.book Page 36 Wednesday, December 28, 2005 8:24 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-D350AG Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info