Bedienungsanleitung JVC GR-D40 (Seite 19 von 48) (Englisch)

533227

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

FOR RECORDING

Manual Focus

To obtain correct focus.

1 If you are using the viewfinder, you should already

have made the necessary viewfinder adjustments

(੬ pg. 8).

2 Set the Power Switch y to “ ” while pressing

down the Lock Button t located on the switch, then

press FOCUS & (੬ pgs. 40 and 41). The manual

focus indicator appears.

3 To focus on a farther subject, rotate the MENU/

VOLUME wheel $ towards “+”. “ ” q appears and

blinks.

To focus on a nearer subject, rotate the MENU/

VOLUME wheel $ towards “–”. “ ” q appears and

blinks.

4 Press the MENU/VOLUME wheel $ in. Focus

adjustment is complete.

To reset to Auto Focus, press FOCUS & twice or set

the Power Switch y to “ ”.

If FOCUS & is pressed once, the camcorder will enter

the focus adjustment mode again.

NOTES:

● Be sure to focus the lens in the maximum telephoto

position when you use the Manual Focus mode. If you

focus in on a subject in the wide-angle position, sharply

focused images cannot be obtained when zoomed up

because the depth-of-field is reduced at longer focal

lengths.

● When the focus level cannot be adjusted any further or

closer, “

” or “ ” will blink.

Exposure Control

Manual exposure adjustment is recommended in the

following situations:

• When shooting using reverse lighting or when the

background is too bright.

• When shooting on a reflective natural background

such as at the beach or when skiing.

• When the background is overly dark or the subject

light.

1 Set the Power Switch y to “ ” while pressing

down the Lock Button t located on the switch. Open

the LCD monitor fully or pull out the viewfinder fully.

2 Press the MENU/VOLUME wheel $ in. The Menu

Screen appears.

3 Rotate the MENU/VOLUME wheel $ to select

“ (EXPOSURE)”, then press it.

4 Rotate the MENU/VOLUME wheel $ to select

“MANUAL”, then press it. The Menu Screen disappears.

The exposure control indicator appears.

5 Rotate the MENU/VOLUME wheel $ towards “+” to

brighten the image, or towards “–” to darken the image.

(maximum ±6)

6 Press the MENU/VOLUME wheel $ in. Exposure

adjustment is complete.

To Return To Automatic Exposure Control . . .

..... select “AUTO” in step 4. Or, set the Power Switch

y to “ ”.

To Brighten The Subject Quickly . . .

..... press BACKLIGHT 0. 4 is displayed and the

subject is brightened. If pressed again, 4

disappears and the brightness returns to the

previous level.

• +3 exposure has the same effect as the BACKLIGHT

Button 0.

• Using BACKLIGHT 0 may cause the light around the

subject to become too bright and the subject to

become white.

• Backlight compensations is also available when the

Power Switch y is set to “ ”.

NOTE:

You cannot use the manual exposure control at the same

time with backlight, spotlight (

੬ pg. 16) compensation and

“SNOW” (

੬ pg. 16).

While focusing on

a nearer subject

While focusing on

a further subject

Focus detection zone

01 D50/40/30/20EK 16-27 02.12.4, 19:1119

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-D40 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-D40

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info