Bedienungsanleitung JVC GR-D53 (Seite 22 von 56) (Englisch)

56729

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

ADDITIONAL FEATURES FOR D.S.C. (GR-D93/D73 only)

22 EN

MasterPage: Left

This camcorder is compatible with the DPOF (Digital

Print Order Format) standard in order to support future

systems such as automatic printing. You can select one

of the 2 print information settings for images stored in the

memory card: “To Print All Still Images (One Print For

Each)” or “To Print By Selecting Still Images And Number

Of Prints”.

NOTES:

● If you load a memory card already set as shown below in a

printer compatible with DPOF, it will make prints of the

selected still images automatically.

● To print images recorded on a tape, first dub them to a

memory card. (੬ pg. 21)

To Print All Still Images (One Print For Each)

1 Load a memory card. (੬ pg. 10)

2 Set the VIDEO/MEMORY Switch to “MEMORY”.

3 Set the Power Switch to “PLAY” while pressing down

the Lock Button located on the switch.

● A stored file is displayed.

4 Press the MMENU/VOL. Wheel in. The Menu Screen

appears.

5 Rotate the MMENU/VOL. Wheel

to select “DPOF”, and press it. The

Sub Menu appears.

6 Rotate the MMENU/VOL. Wheel

to select “ALL 1”, and press it. The

DPOF screen appears.

7 Rotate the MMENU/VOL. Wheel

to select “EXECUTE”, and press it.

The normal playback screen

appears.

● To cancel selection, select

“RETURN”.

To Print By Selecting Still Images And Number Of

Prints

1 Perform steps 1 – 5 in “To Print All Still Images (One

Print For Each)”.

2 Rotate the MMENU/VOL. Wheel

to select “CURRENT”, and press it.

The DPOF screen appears.

3 Press 3 or 5 to select the

desired file.

4 Rotate the MMENU/VOL. Wheel

to select the number indication (00), and press it.

5 Select the number of prints by

rotating the MMENU/VOL. Wheel

towards “+” to increase number, or

towards “–” to decrease the

number, and press it.

● Repeat steps 3 through 5 for the

desired number of prints.

● The number of prints can be set up to 15.

● To correct the number of prints, select the image again and

change the number.

6 Rotate the MMENU/VOL. Wheel

to select “RETURN”, and press it.

The “SAVE?” appears.

● If you did not change any settings in

step 3 through 5, the Menu Screen

reappears.

7 Rotate the MMENU/VOL. Wheel

to select “EXECUTE” to save the setting you have just

made, and press it.

● To cancel selection, select “CANCEL”.

To Reset The Number Of Prints

1 Perform steps 1 – 5 in “To Print All Still Images (One

Print For Each)”.

2 Rotate the MMENU/VOL. Wheel to select “RESET”,

and press it. The DPOF screen appears.

3 Rotate the MMENU/VOL. Wheel to select

“EXECUTE”, and press it. The normal playback screen

appears.

● To cancel selection, select “RETURN”.

● The number of prints is reset to 0 for all still images.

CAUTION:

While performing the above, never disconnect power, as this

may cause the memory card to be corrupted.

Setting Print Information (DPOF Setting)

DPOF

RENT

ALL 1

RESET

CUR

RETURN

DPOF

EXECUTE

ALL1?

RETURN

SHEETS

DPOF

SHEETS

DPOF

EXECUTE

SAVE?

CANCE L

GR-D93PAL.book Page 22 Wednesday, October 29, 2003 9:36 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-D53 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-D53

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info