Bedienungsanleitung JVC GR-D60 (Seite 31 von 56) (Englisch)

471637

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

USING MENUS FOR DETAILED ADJUSTMENT

TIME CODE

[OFF]: Time code is not displayed.

ON: Time code is displayed on the camcorder and on

the connected TV. Frame numbers are not displayed

during recording.

CLOCK ADJ.

Allows you to set the current date and time (੬ pg. 10).

DSC

QUALITY , IMAGE SIZE

Refer to “Picture Quality/Image Size Setting”

(੬ pg. 11).

REC SELECT

[ ]: When Snapshot recording is performed

with the VIDEO/MEMORY Switch 4 set to “VIDEO”,

still images are recorded only onto the tape.

/ : When Snapshot recording is

performed with the VIDEO/MEMORY Switch 4 set to

“VIDEO”, still images are recorded not only onto the

tape but also on the memory card (640 x 480 pixels).

In this mode, the “SNAP MODE” selection in the

CAMERA Menu is also applicable to memory card

recording.

VIDEO

SOUND MODE

........ ੬ pg. 32, “Playback Sound”.

12BIT MODE

........ ੬ pg. 32, “Display”.

SYNCHRO

........ ੬ pg. 39, “For More

Accurate Editing”.

REC MODE

Allows you to set the tape recording mode ([SP] or

LP) depending on your preference (੬ pg. 10).

It is recommended you use “REC MODE” in the

“ VIDEO” Menu when using this camcorder as a

recorder during dubbing (GR-D70 only, ੬ pg. 33, 34).

•“REC MODE” can be set when the Power Switch u is

set to “PLAY” or “ ” (੬ pg. 10, 28).

COPY

ON: Enables dubbing of images recorded on a tape

to a memory card (੬ pg. 21).

[OFF]: Enables snapshots to be taken during tape

playback.

S/AV INPUT

(GR-D70 only)

ON: Enables audio/video signal input from the AV

and S-VIDEO connectors (੬ pg. 33).

[OFF]: Enables audio/video signal output to a TV,

VCR, etc. via the AV and S-VIDEO connectors

(੬ pg. 16, 33).

• When “S/AV INPUT” is set to “ON”, camcorder

playback cannot be viewed on the AV output.

–

RETURN

–

DSC

TYQUAL I

REC SELECT

FINE

021X7486

IMAGE SIZE

–

IVDE

MDOESOUND

MDOE

BIT

ROSYNCH

ODEREC M

COPY

STEREO

SOUND

OFF

O.O

NPUT

AV I

RETURN

MELODY

EEPB

–

RETURN

AM RES E TC

LCD

RIORITYP

–

EMO MODED

–

EMOT ER

–

ALLYT

–

SYSTE

For Playback Menu

The following procedure applies to all except Synchro

Comp (੬ pg. 39).

1 Set the VIDEO/MEMORY Switch 4 to “VIDEO”,

then set the Power Switch u to “PLAY” while pressing

down the Lock Button y located on the switch.

2 Press the MENU/VOLUME wheel % in. The Menu

Screen appears.

3 Rotate the MENU/VOLUME wheel % to select the

desired function menu, and press it.

4 Rotate the MENU/VOLUME wheel % to select the

desired function, and press it to display the Sub Menu.

5 Rotate the MENU/VOLUME wheel % to select the

desired parameter and press it. Selection is complete.

6 Rotate the MENU/VOLUME wheel % to select

“ RETURN” and press it twice to close the Menu

Screen.

SYSTEM

Each setting is linked with “ SYSTEM”, which

appears when the Power Switch u is set to “ ”

(੬ pg. 30).

The parameters are the same as in the description on

pg. 30.

[ ] = Factory-preset

01 GR-D70/60EK 23-34 02.12.4, 17:1731

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-D60 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-D60

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info