Bedienungsanleitung JVC GR-D60 (Seite 38 von 56) (Englisch)

471637

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

USING THE REMOTE CONTROL UNIT

)

● Make sure to set “S/AV INPUT” to “OFF” in the Menu

Screen (GR-D70 only,

੬ pg. 31).

● Set the video out select switch of the cable adapter as

required:

Y/C : When connecting to a TV or VCR which accepts

Y/C signals and uses an S-Video cable.

CVBS : When connecting to a TV or VCR which does not

accept Y/C signals and uses an audio/video

cable.

● When editing on a VCR equipped with a DV input

connector, an optional DV cable can be connected

instead of an S-Video cable and audio/video cable.

To Remote PAUSE

or R.A.EDIT

To PAUSE IN $

Editing cable***

Audio/Video cable

(provided)

* Connect when an S-Video cable is not used.

** When connecting cables, open this cover.

*** Provided with the optional Remote Control kit

RM-V717KITU.

Connector

cover**

To AV

(

To EDIT )

S-VIDEO

Programme

Random

Assemble

Editing Menu

–– : –– ~

––

NIOUT

MODE

–

––

000

TOTAL

CODETIME

VCR

“Y/C”/“CVBS”

video out

select switch

If your VCR has the

SCART connector,

use the provided

cable adapter.

To AUDIO, VIDEO*

and

-IN

connectors

5 If using a Fade/Wipe at the beginning of the scene,

press FADE/WIPE 9 on the remote control.

• Cycle through the effects by pressing repeatedly, and

stop when the one you want is displayed.

6 At the beginning of the scene, press EDIT IN/OUT

@ on the remote control. The Edit-In position appears

in the Random Assemble Editing Menu.

7 At the end of the scene, press EDIT IN/OUT @. The

Edit-Out position appears in the Random Assemble

Editing Menu.

8 If using a Fade/Wipe at the end of the scene, press

FADE/WIPE 9.

• Cycle through the effects by pressing repeatedly, and

stop when the one you want is displayed.

• If you select a Fade/Wipe effect for an Edit-Out point,

the effect is automatically applied to the following

Edit-In point.

• When you use Fade/Wipe effects, that time is

included in the total time.

9 If using Playback Special Effects, press EFFECT !

(੬ pg. 35).

Repeat steps 6 through 9 to register additional

scenes.

• To change previously registered points, press

CANCEL # on the remote control. The registered

points disappear, one at a time, from the most

recently registered point.

• If you are not using Fade/Wipe or Programme AE with

special effects, repeat steps 6 and 7 only.

NOTES:

● When choosing a scene, set Edit-In and Edit-Out points

so that there is a relatively large difference between

them.

● If the search time for an in-point exceeds 5 minutes, the

recording deck’s Record-Standby mode will be cancelled

and editing will not take place.

● If there are blank portions before or after the Edit-In and

Edit-Out points, a blue screen may be included in the

edited version.

● Since time codes register time only as accurately as

seconds, the time code total time may not match the total

programme time exactly.

● Turning off the camcorder’s power erases all registered

Edit-In and Edit-Out points.

SELECT SCENES

4 Point the remote control at the camcorder’s remote

sensor. Press PLAY (

) ) and then press R.A.EDIT

ON/OFF r on the remote control.

The Random Assemble Editing Menu appears.

S-Video cable

(optional)

01 GR-D70/60EK 35-40 02.12.4, 17:1938

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-D60 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-D60

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info