Bedienungsanleitung JVC GR-D70 (Seite 33 von 56) (Englisch)

23027

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

DUBBING

Dubbing To Or From A VCR

To Use This Camcorder As A Player

1 Following the illustration, connect the camcorder

and the VCR. Also refer to pg. 16.

2 Set the VIDEO/DSC Switch 4 to “VIDEO” (GR-D90/

D70 only), then set the camcorder’s Power Switch y to

“PLAY” while pressing down the Lock Button t located

on the switch, turn on the VCR’s power, and insert the

appropriate cassettes in the camcorder and the VCR.

3 Engage the VCR’s AUX and Record-Pause modes.

4 Engage the camcorder’s Play mode to find a spot

just before the edit-in point. Once it is reached, press

/6 7 on the camcorder.

5 Press

/6 7 on the camcorder and engage the

VCR’s Record mode.

6 Engage the VCR’s Record-Pause mode and press

/6 7 on the camcorder.

7 Repeat steps 4 through 6 for additional editing, then

stop the VCR and camcorder when finished.

NOTES:

● As the camcorder starts to play your footage it will appear

on your TV. This will confirm the connections and the AUX

channel for dubbing purposes.

● Before you start dubbing, make sure that the indications

do not appear on the connected TV. If they do, they are

being recorded onto the new tape.

To choose whether or not the following displays

appear on the connected TV . . .

• Date/Time

..... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the

Menu Screen (੬ pg. 30, 32).

Or, press DISPLAY l on the remote control

(provided with GR-D90/D70 only) to turn on/off the

date indication.

• Time Code

..... set “TIME CODE” to “ON” or “OFF” in the Menu

Screen (੬ pg. 31, 32).

• Indications other than date/time and time code

..... set “ON SCREEN” to “LCD”, “LCD/TV” or “OFF” in

the Menu Screen (੬ pg. 30, 32).

For GR-D90/D70 Owners:

To Use This Camcorder As A Recorder

1. Set the VIDEO/DSC Switch 4 to “VIDEO”, then set

the camcorder’s Power Switch y to “PLAY” while

pressing down the Lock Button t located on the

switch.

2. Set “S/AV INPUT” to “ON” and set “REC MODE” to

“SP” or “LP” (੬ pg. 31).

3. Connect the cables as shown in the illustration and

load a cassette to record on.

4. Press the Recording Start/Stop button w to

engage the Record-Pause mode. “

AV. IN

” appears

on the screen.

5. Press the Recording Start/Stop button w to start

recording. 3 rotates.

6. Press the Recording Start/Stop button w again to

engage the Record-Pause mode. 3 stops

rotating.

NOTES:

● After dubbing, set “S/AV INPUT” back to “OFF”.

● Analog signals can be converted to digital signals with

this procedure.

● It is also possible to dub from another camcorder.

Connector

cover*

* When connecting the cable, open this cover.

** Connect when an S-Video cable is not used.

VCR

To AV

(

S-VIDEO

)

Audio/

Video cable

(provided)

White to

AUDIO L

IN or OUT

Red to AUDIO

R IN or OUT

To S-VIDEO

IN or OUT

S-Video cable

(optional)

Yellow to VIDEO**

IN or OUT

1 GR-D90/70/30US EN 23-34 02.11.6, 3:13 PM33

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-D70 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-D70

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info