Bedienungsanleitung JVC GR-D770 (Seite 41 von 52) (Englisch)

56751

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

EN 41

FEATURES FOR RECORDING

MasterPage: Start_Right

ADVANCED FEATURES

FINE: Outdoors on a sunny day.

CLOUD: Outdoors on a cloudy day.

HALOGEN: A video light or similar type of

lighting is used.

[ ]Factory-preset

Adjust the white balance

manually when shooting

under various types of

lighting.

1 Set the Power Switch

to “REC”.

2 Set the recording mode to “M”. (੬ pg. 21)

3 Hold a sheet of plain white paper in front of

the subject. Adjust zoom or position yourself so

that the white paper fills the screen.

4 Select “MWB” in “W.BALANCE” menu.

(੬ pg. 34), then press and hold SET or until

begins blinking.

● When the setting is completed, stops

blinking.

5 Press SET or to engage the setting.

6 Press MENU. The Menu Screen closes and

the Manual White Balance indicator is

displayed.

NOTES:

● In step 3, it may be difficult to focus on the white

paper. In such a case, adjust focus manually.

(੬ pg. 39)

● Because the coloured temperature is different

depending on the light source, use the function for

a more natural result.

● Once you adjust white balance manually, the

setting is retained even if the power is turned off or

the battery removed.

● White Balance cannot be activated

simultaneously with “TWILIGHT” in “PROGRAM

AE” (੬ pg. 42).

● White Balance cannot be activated if the “SEPIA”

or “MONOTONE” mode is activated.

These effects let you make pro-style scene

transitions. Use them to spice up the transition

from one scene to the next.

Wipe or Fader works when video recording is

started or stopped.

1 Set the VIDEO/MEMORY Switch to “VIDEO”.

2 Set the Power Switch to “REC”.

3 Set the recording mode to “M”. (੬ pg. 21)

4 Set “WIPE/FADER” in “FUNCTION” Menu.

(੬ pg. 34)

5 Press the Recording Start/Stop Button to

activate the Fade-in/out or Wipe-in/out.

NOTE:

You can extend the length of a Wipe or Fader by

pressing and holding the Recording Start/Stop

Button.

WIPE/FADER

OFF: Disables the function. (Factory-preset)

WHITE : Fade in or out with a white screen.

BLACK : Fade in or out with a black screen.

SLIDE : Wipe in from right to left, or wipe out

from left to right.

SCROLL : The scene wipes in from the

bottom to the top of a black screen, or wipes out

from top to bottom, leaving a black screen.

1 Set the Power Switch to “REC”.

2 Set the recording mode to “M”. (੬ pg. 21)

3 Set “EFFECT”, “PROGRAM AE” or

“SHUTTER” in “FUNCTION” Menu. (੬ pg. 34)

● The selected effect will be shown for approx. 2

seconds before the camcorder returns to the

menu screen.

NOTES:

● Shutter Effects cannot be used during “NIGHT”.

● When a subject is too bright or reflective, a vertical

streak may appear (smear phenomenon). Smear

phenomenon tends to occur when “SPORTS” or

mode of “SHUTTER 1/500 and 1/4000” is

selected.

Manual White Balance Adjustment

White paper

Wipe Or Fader Effects

Program AE, Effects and Shutter

Effects

CONTINUED ON NEXT PAGE

GR-D770EK_GR-D760EK_EN.book Page 41 Thursday, December 14, 2006 4:18 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-D770 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-D770

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info