Bedienungsanleitung JVC GR-D770 (Seite 45 von 52) (Englisch)

56751

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

EN 45

EDITING

MasterPage: Start_Right

ADVANCED FEATURES

[A] Using USB cable

It is possible to transfer still images stored on a

memory card to a PC.

[B] Using DV cable

It is also possible to transfer still/moving images

to a PC with a DV connector by using the

provided software, software equipped with the

PC or commercially available software.

If you are using a Windows

XP, you can use

Windows

Messenger to conduct video

conferences over the Internet, using a

camcorder. For details, refer to the help for the

Windows

Messenger.

NOTES:

● Refer to “SOFTWARE INSTALLATION AND USB

CONNECTION GUIDE” for the bundled software

and drivers.

● It is recommended to use the AC Adapter as

the power supply instead of the battery pack.

(੬ pg. 15)

● Never connect the USB cable and the DV

cable simultaneously to the camcorder.

Connect only the cable you wish to use to the

camcorder.

● When using a DV cable, be sure to use the

optional JVC VC-VDV206U or VC-VDV204U DV

cable depending on the type of DV connector

(4 or 6 pins) on the PC.

● If the PC connected to the camcorder via the USB

cable is not powered, the camcorder does not

enter the USB mode.

● The date/time information cannot be captured into

the PC.

● Refer to the instruction manuals of the PC and

Software.

● The still images can also be transferred to a PC

with a DV connector-equipped capture board.

● The system may not work properly depending on

the PC or capture board you are using.

● If, after connecting a DV cable to the camcorder

and it doesn’t work, restart the camcorder.

● Do not remove memory card during USB

connection between PC and set.

The audio track can be customised only when

recorded in the 12-BIT and SP modes.

(੬ pg. 35)

● Use the provided remote control.

1 Play back the tape to locate the point where

editing will start, then press PAUSE (9).

2 While holding A. DUB (D) on the remote

control, press PAUS E (9). The “9D” indicator

appears.

3 Press PLAY (U), then begin “narrating”.

Speak into the microphone.

● To pause dubbing, press PAUSE (9).

4 To end Audio Dubbing, press PAUSE (9),

then STOP (8).

To hear the dubbed sound during playback

Set “NARRATION” to “ON” or “MIX”. (੬ pg. 37)

NOTES:

● Sound is not heard from the speaker during Audio

Dubbing.

● When editing onto a tape that was recorded at

12-BIT, the old and new soundtracks are recorded

separately.

● If you dub onto a blank space on the tape, the

sound may be disrupted. Make sure you only edit

recorded areas.

● If feedback or howling occurs during TV playback,

move the camcorder’s microphone away from the

TV, or turn down the TV’s volume.

“USB” and/or “” appears on the

LCD monitor while the PC is accessing data in

the camcorder or the camcorder is

transferring a file to the PC.

NEVER disconnect the USB cable while

“ ” is displayed on the LCD

monitor since this can result in product

damage.

Audio Dubbing

Speaker

Stereo

Microphone

GR-D770EK_GR-D760EK_EN.book Page 45 Thursday, December 14, 2006 4:18 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-D770 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-D770

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info