Bedienungsanleitung JVC GR-D93 (Seite 10 von 56) (Englisch)

56733

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

GETTING STARTED

10 EN

MasterPage: Left

The camcorder needs to be powered up to load or eject a

cassette.

1 Slide and hold OPEN/EJECT in the direction of the

arrow, then pull the cassette holder cover open until it

locks. The cassette holder opens automatically.

● Do not touch internal components.

2 Insert or remove a tape and press “PUSH HERE” to

close the cassette holder.

● Be sure to press only the section labelled “PUSH HERE” to

close the cassette holder; touching other parts may cause

your finger to get caught in the cassette holder, resulting in

injury or product damage.

● Once the cassette holder is closed, it recedes

automatically. Wait until it recedes completely before

closing the cassette holder cover.

● When the battery pack’s charge is low, you may not be able

to close the cassette holder cover. Do not apply force.

Replace the battery pack with a fully charged one or use

AC power before continuing.

3 Close the cassette holder cover firmly until it locks into

place.

Approximate recording time

To switch the recording mode, refer to pages 24 and 25.

To protect valuable recordings

Slide the erase protection tab on the back of the tape in

the direction of “SAVE”. This prevents the tape from

being recorded over. To record on this tape, slide the tab

back to “REC” before loading it.

For other notes, ੬ pg. 39.

The provided memory card is already inserted in the

camcorder at the time of purchase.

1 Make sure the camcorder’s power is off.

2 Open the LCD monitor (੬ pg. 12), then open the card

cover (MEMORY CARD).

3 To load a memory card, firmly insert it with its

clipped edge first.

To unload a memory card, push it once. After the

memory card comes out of the camcorder, pull it out.

● Do not touch the terminal on the reverse side of the label.

4 Close the card cover.

To protect valuable files (available only for SD

Memory Card)

Slide the write/erase protection tab

on the side of the memory card in

the direction of “LOCK”. This

prevents the memory card from

being recorded over. To record on

this memory card, slide the tab

back to the position opposite to

“LOCK” before loading it.

NOTES:

● Be sure to use only SD Memory Cards marked “ ” or

MultiMediaCards marked “ ”.

● Some brands of memory cards are not compatible with this

camcorder. Before purchasing a memory card, consult its

manufacturer or dealer.

● Before using a new memory card, it is necessary to

FORMAT the card. (੬ pg. 23)

TTENTION:

Do not insert or remove the memory card while the

camcorder is turned on, as this may cause the memory card

to be corrupted or cause the camcorder to become unable to

recognise whether or not the card is installed.

Loading/Unloading A Cassette

Tape

Recording mode

SP LP

30 min. 30 min. 45 min.

60 min. 60 min. 90 min.

80 min. 80 min. 120 min.

Make sure the

window side is facing

out.

Cassette holder

cover

Cassette holder

PUSH HERE

OPEN/EJECT

Erase protection tab

Loading/Unloading A Memory Card

(GR-D93/73 only)

Memory card

Clipped edge

Card Cover (MEMORY CARD)

Label

Write/erase

protection tab

GR-D93PAL.book Page 10 Wednesday, October 29, 2003 9:36 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-D93 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-D93

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info