Bedienungsanleitung JVC GR-D93 (Seite 14 von 56) (Englisch)

56733

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

14 EN

MasterPage: Heading0_Left

VIDEO PLAYBACK

1 Load a cassette. (੬ pg. 10)

2 Set the VIDEO/MEMORY Switch to “VIDEO”.

(GR-D93/73 only)

3 Set the Power Switch to “PLAY” while pressing down

the Lock Button located on the switch.

4 To start playback, press 4/9.

5 To stop playback, press 8.

● During Stop mode, press 3 to rewind, or 5 to fast-

forward the tape.

To control the speaker volume

Rotate the MMENU/VOL. Wheel towards “+” to turn up

the volume, or towards “–” to turn down the volume.

NOTES:

● The playback picture can be viewed in the LCD monitor,

viewfinder or on a connected TV. (੬ pg. 17)

● For other notes, ੬ pg. 39.

Still Playback

Pauses during video playback.

1) Press 4/9 during playback.

2) To resume normal playback, press 4/9 again.

● If still playback continues for more than about 3 minutes,

the camcorder’s Stop mode is automatically engaged.

● When 4/9 is pressed, the image may not pause

immediately while the camcorder stabilises the still image.

Shuttle Search

Allows high-speed search in either direction during video

playback.

1) During playback, press 5 for forward search, or

3 for reverse search.

2) To resume normal playback, press 4/9.

● During playback, press and hold 5 or 3. The search

continues as long as you hold the button. Once you release

the button, normal playback resumes.

● A slight mosaic effect appears on the display during Shuttle

Search. This is not a malfunction.

TTENTION:

During Shuttle Search, parts of the

picture may not be clearly visible,

particularly on the left side of the

screen.

Blank Search

Helps you find where you should start recording in the

middle of a tape to avoid time code interruption.

(੬ pg. 13)

1 Load a cassette. (੬ pg. 10)

2 Set the VIDEO/MEMORY Switch to “VIDEO”.

(GR-D93/73 only)

3 Set the Power Switch to “PLAY” while pressing down

the Lock Button located on the switch.

4 During Stop mode, press BLANK SEARCH.

● The “BLANK SEARCH” indication appears and the

camcorder automatically starts reverse or forward search,

then stops at the spot which is about 3 seconds of tape

before the beginning of the detected blank portion.

● To cancel Blank Search midway, press 8.

NOTES:

● Before starting Blank Search, if the current position is at a

blank portion, the camcorder searches in the reverse

direction. If the current position is at a recorded portion, the

camcorder searches in the forward direction.

● Blank Search does not work if “USE CLEANING

CASSETTE” has appeared with the tape.

● If the beginning or end of the tape is reached during Blank

Search, the camcorder stops automatically.

● A blank portion which is shorter than 5 seconds of tape

may not be detected.

● The detected blank portion may be located between

recorded scenes. Before you start recording, make sure

there is no recorded scene after the blank portion.

Normal Playback

Speaker

4/9

Lock Button

VIDEO/MEMORY (GR-D93/73 only)

Power Switch

MMENU/VOL.

BLANK SEARCH

GR-D93PAL.book Page 14 Wednesday, October 29, 2003 9:36 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-D93 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-D93

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info