Bedienungsanleitung JVC GR-D93 (Seite 34 von 56) (Englisch)

56733

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

FEATURES FOR RECORDING

34 EN

MasterPage: Left

Backlight compensation

brightens the subject quickly.

Press BACKLIGHT. The

indicator is displayed and the

subject is brightened. If

pressed again,

disappears and the

brightness returns to the

previous level.

● Using the BACKLIGHT

Button may cause the light around the subject to become

too bright and the subject to become white.

● Backlight compensations is also available when the Power

Switch is set to “A”.

The white balance that refers to the correctness of colour

reproduction under various lighting. If the white balance

is correct, all other colours will be accurately reproduced.

The white balance is usually adjusted automatically.

However, more advanced camcorder operators control

this function manually to achieve a more professional

colour/tint reproduction.

To change the setting

Set “u” to the desired mode. (੬ pg. 24)

● The selected mode indicator except “AUTO” appears.

[AUTO]: White balance is adjusted automatically.

MWB: Adjust the white balance manually when

shooting under various types of lighting. (੬ “Manual

White Balance Adjustment”)

FINE: Outdoors on a sunny day.

CLOUD: Outdoors on a cloudy day.

HALOGEN: A video light or similar type of lighting

is used.

[ ] = Factory-preset

To return to automatic white balance

Set “u” to “AUTO”. (੬ pg. 24)

Or, set the Power Switch to “A”.

NOTE:

White balance cannot be used when “r” is set to “SEPIA” or

“MONOTONE”. (੬ pg. 31)

Adjust the white balance

manually when shooting

under various types of

lighting.

1 Set the Power Switch to

“M” while pressing down

the Lock Button located on

the switch.

2 Open the LCD monitor fully. (੬ pg. 12)

3 Set “u” to “MWB”. (੬ pg. 24)

● The indication blinks slowly.

4 Hold a sheet of plain white paper in front of the

subject. Adjust zoom or position yourself so that the

white paper fills the screen.

5 Press the MMENU/VOL. Wheel in until begins

blinking rapidly.

● When the setting is completed, resumes normal

blinking.

6 Press the MMENU/VOL. Wheel in twice. The Menu

Screen closes and the Manual White Balance indicator

is displayed.

NOTES:

● In step 4, it may be difficult to focus on the white paper. In

such a case, adjust focus manually. (੬ pg. 32)

● A subject can be shot under various types of lighting

conditions indoors (natural, fluorescent, candlelight, etc.).

Because the colour temperature is different depending on

the light source, the subject tint will differ depending on the

white balance settings. Use this function for a more natural

result.

● Once you adjust white balance manually, the setting is

retained even if the power is turned off or the battery

removed.

Backlight Compensation

White Balance Adjustment

BACKLIGHT Button

Manual White Balance Adjustment

White paper

GR-D93PAL.book Page 34 Wednesday, October 29, 2003 9:36 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-D93 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-D93

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info