Bedienungsanleitung JVC GR-DF430 (Seite 47 von 84) (Englisch)

595789

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

EN 47

FEATURES FOR RECORDING

MasterPage: Start_Right

ADVANCED FEATURES

These effects let you make pro-style scene

transitions. Use them to spice up the transition

from one scene to the next.

Wipe or Fader works when video recording is

started or stopped.

1 Set the VIDEO/MEMORY Switch to “VIDEO”.

2 Set the Power Switch to “M”.

3 Set “v” to the desired mode. (墌 pg. 36)

● The WIPE/FADER menu disappears and the

effect is reserved.

● The selected effect indicator appears.

4 Press the Recording Start/Stop Button to

activate the Fade-in/out or Wipe-in/out.

To deactivate the selected effect

Select “OFF” in step 3. The effect indicator

disappears.

NOTES:

● You can extend the length of a Wipe or Fader by

pressing and holding the Recording Start/Stop

Button.

● Some Wipe/Fader Effects cannot be used with

certain modes of Program AE with special effects.

(See the right column.) In this case, the selected

indicator blinks or goes out.

WIPE/FADER

OFF: Disables the function. (Factory-preset)

FADER–WHITE: Fade in or out with a white

screen.

FADER–BLACK: Fade in or out with a black

screen.

FADER–B.W: Fade in to a color screen

from a black and white screen, or fade out from

color to black and white.

WIPE–CORNER: Wipe in on a black screen

from the upper right to the lower left corner, or

wipe out from lower left to upper right, leaving a

black screen.

WIPE–WINDOW: The scene starts in the

center of a black screen and wipes in toward the

corners, or comes in from the corners, gradually

wiping out to the center.

WIPE–SLIDE: Wipe in from right to left, or

wipe out from left to right.

WIPE–DOOR: Wipe in as the two halves of

a black screen open to the left and right,

revealing the scene, or wipe out and the black

screen reappears from left and right to cover the

scene.

WIPE–SCROLL: The scene wipes in from

the bottom to the top of a black screen, or wipes

out from top to bottom, leaving a black screen.

WIPE–SHUTTER: Wipe in from the center

of a black screen toward the top and bottom, or

wipe out from the top and bottom toward the

center leaving a black screen.

1 Set the Power Switch to “M”.

2 Set “r” to the desired mode. (墌 pg. 36)

● The PROGRAM AE menu disappears and the

selected effect is activated.

● The selected effect indicator appears.

To deactivate the selected effect

Select “OFF” in step 2. The effect indicator

disappears.

NOTES:

● Some modes of Program AE with special effects

cannot be used during Night-Alive.

● When a subject is too bright or reflective, a vertical

streak may appear (smear phenomenon). Smear

phenomenon tends to occur when “SPORTS” or

any mode of “SHUTTER 1/250 – 1/4000” is

selected.

● Some modes of Program AE with special effects

cannot be used with certain Wipe/Fader effects.

(See the left column.) In this case, the selected

indicator blinks or goes out.

Wipe Or Fader Effects

Program AE With Special Effects

CONTINUED ON NEXT PAGE

GR-DF550US.book Page 47 Thursday, February 24, 2005 11:17 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-DF430 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info