452692
29
Zoom out
Zoom in
Vorherige Seite
1/96
Nächste Seite
EN29
: Factory-preset
BEEP
Even though not heard while shooting, shutter sound is recorded on the tape.
The beep sounds when the power is turned on or off, and at the beginning and end
of recording. Also to activate the shutter sound effect ( pg. 18, 19).
Instead of a beep, a melody sounds when any operation is performed. It also
activates the shutter sound effect ( pg. 18, 19).
The tally lamp remains off at all times.
The tally lamp comes on to signal the start of recording.
Automatic demonstration will not take place.
Demonstrates certain functions such as Programme AE with special effects,
etc., and can be used to confirm how these functions operate. When DEMO
MODE is set to ON and the Menu Screen is closed, demonstration starts.
Performing any operation during the demonstration stops the demonstration
temporarily. If no operation is performed for more than 1 minute after that,
the demonstration will resume.
NOTES:
If a tape is in the camcorder, the demonstration cannot be turned on.
DEMO MODE remains ON even if the camcorder power is turned off.
If DEMO MODE remains ON, some functions will not be available.
After viewing demo, set to OFF.
Keeps the camcorders display (except the date, time and time code) from
appearing on the connected TV screen.
Makes the camcorders display appear on screen when the camcorder is
connected to a TV.
The date/time does not appear.
Displays the date/time for approx. 5 seconds in the following cases:
When the Power Switch is set from OFF to or .
When video playback starts. The camcorder displays the date/time when
scenes are recorded.
When the date is changed during video playback.
The date/time is always displayed.
Time code is not displayed.
Time code is displayed on the camcorder and on the connected TV. Frame
numbers are not displayed during recording.
Allows you to set the current date and time ( pg. 9).
Refer to Picture Mode Setting ( pg. 14).
NOTES:
SYSTEM and DISPLAY functions which are set when the Power Switch is set to are also
applied when the Power Switch is set to (
pg. 39). CLOCK ADJ. only appears when the Power
Switch is set to .
The DISPLAY settings are effective even when the Power Switch is set to .
The ON SCREEN setting can also be changed by pressing the DISPLAY Button on the remote control
(provided) (
pg. 53, 56, 66).
SYSTEM
OFF
BEEP
MELODY
OFF
ON
OFF
ON
LCD
LCD/TV
OFF
AUTO
ON
OFF
ON
TIME
CODE
CLOCK ADJ.
QUALITY
SIZE
UXGA
DSC
DISPLAY
DATE/
TIME
ON
SCREEN
TALLY
DEMO
MODE
29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für JVC GR-DV1800 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von JVC GR-DV1800

JVC GR-DV1800 Bedienungsanleitung - Holländisch - 96 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info