Bedienungsanleitung JVC GR-DV1800 (Seite 37 von 96) (Englisch)

452692

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

EN37

White Balance Adjustment

A term that refers to the correctness of colour

reproduction under various lighting. If the white

balance is correct, all other colours will be

accurately reproduced.

The white balance is usually adjusted automatically.

However, more advanced camcorder operators

control this function manually to achieve a more

professional colour/tint reproduction.

Set the Power Switch to “ ” while pressing

down the Lock Button located on the switch,

then pull out the viewfinder fully or open the

LCD monitor fully.

Press the MENU wheel. The Menu Screen

appears.

Rotate the MENU wheel to select “

W.BALANCE”, then press it. The W.BALANCE

Menu appears.

Rotate the the MENU wheel to select the

desired mode.

“AUTO”–White balance is adjusted

automatically (factory

preset).

“ MWB”–White balance is set

manually.

“ FINE”–Outdoors on a sunny day.

“ CLOUD”–Outdoors on a cloudy day.

“ HALOGEN”–A video light or similar type

of lighting is used.

Press the MENU wheel. Selection is complete.

Press the MENU wheel again. The Menu Screen

closes and the selected mode indicator except

“AUTO” appears.

To Return To Automatic White Balance . . .

.... select “AUTO” in step 4. Or, set the Power

Switch to “ ”.

NOTE:

White balance cannot be used when Sepia or

Monotone (



pg. 35) is activated.

Manual White Balance Operation

Perform Manual White Balance when shooting under

various types of lighting.

Follow steps 1 through 4 of the white balance

adjustment, and select “ MWB”.

Hold a sheet of plain white paper in front of the

subject. Adjust zoom or position yourself so that

the white paper fills the screen.

Press the MENU wheel until begins blinking

rapidly.

When the setting is completed, resumes

normal blinking.

Press the MENU wheel. The Menu Screen

closes and the Manual White Balance indicator

is displayed.

White

paper

Power Switch

MENU Wheel

To Change The Tint For Recording . . .

.... in step 2, substitute coloured paper for white.

The white balance is adjusted based on the

colour, changing the tint. Red paper = deeper

green; blue paper = orange; yellow paper =

deeper purple.

NOTES:

●

In step 2, it may be difficult to focus on the white

paper. In such a case, adjust focus manually

(



pg. 25).

●

A subject can be shot under various types of

lighting conditions indoors (natural, flourescent,

candlelight, etc.). Because the colour temperature

is different depending on the light source, the

subject tint will differ depending on the white

balance settings. Use this function for a more

natural result.

●

Once you adjust white balance manually, the

setting is retained even if the power is turned off or

the battery removed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-DV1800 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-DV1800

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info