452692
74
Zoom out
Zoom in
Vorherige Seite
1/96
Nächste Seite
74 EN
TROUBLESHOOTING
(cont.)
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
7.
The cassette will not load
properly.
8.
The memory card will not
load properly.
9.
In the 5-Second mode,
recording ends before
5 seconds have elapsed.
10.
Snapshot mode cannot be
used.
11.
The colour of Snapshot
looks strange.
12.
The image taken using
Snapshot is too dark.
13.
The image taken using
Snapshot is too bright.
14.
Digital Zoom does not
work.
15.
Programme AE with
special effects and Fade/
Wipe Effects do not work.
16.
The Black & White Fader
does not work.
7.
The cassette is in the wrong
position.
The batterys charge is low.
8.
The memory card is in the
wrong position.
9.
The 5-Second mode is set to
ANIM. in the Menu
Screen.
10.
The Squeeze mode is
selected.
11.
The light source or the
subject does not include
white. Or there are various
different light sources behind
the subject.
The Sepia or Monotone
mode is activated.
12.
Shooting was performed
under backlit conditions.
13.
The subject is too bright.
14.
10X optical zoom is selected.
The Shooting Mode Switch is
set to XGA/VGA or
UXGA.
•“PROGRAM AE is set to
VIDEO ECHO in the Menu
Screen.
•“WIDE MODE is set to PS-
WIDE in the Menu Screen.
Multi-Analyser 4 or Multi-
Analyser 9 was attempted
during Digital Zoom.
Picture Wipe or Dissolve are
being used in a scene
transition.
15.
The Power Switch is set to
.
16.
The Sepia or Monotone
mode is activated.
7.
Set it in the right position
( pg. 10).
Install a fully charged
battery ( pg. 6, 7).
8.
Set it in the right position
( pg. 11).
9.
Select 5S in the Menu
Screen ( pg. 31).
10.
Disengage the Squeeze
mode ( pg. 28).
11.
Find a white subject and
compose your shot so that it
also appears in the frame
( pg. 18, 19).
Turn off Sepia and
Monotone ( pg. 34, 35).
12.
Press the BACKLIGHT
Button ( pg. 36).
13.
Set PROGRAM AE to
SPOTLIGHT in the Menu
Screen ( pg. 34).
14.
Set ZOOM to 40X or
300X in the Menu Screen
( pg. 27).
Set the Shooting Mode
Switch to VIDEO
( pg. 12, 20).
Disengage the VIDEO
ECHO mode ( pg. 20,
35).
Disengage the PS-WIDE
mode ( pg. 28).
Disengage Multi-Analyser 4
or Multi-Analyser 9
( pg. 18).
Wait until the Picture Wipe
or Dissolve effects are
completed ( pg. 20, 32).
15.
Set the Power Switch to
( pg. 32, 34).
16.
Turn off Sepia and
Monotone ( pg. 32, 34).
74

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für JVC GR-DV1800 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von JVC GR-DV1800

JVC GR-DV1800 Bedienungsanleitung - Holländisch - 96 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info