Bedienungsanleitung JVC GR-DV2000 (Seite 21 von 98) (Englisch)

452693

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

EN21

UXGA F I NE

10 / 24

RECORDING

Basic Recording For Digital Still Camera (D.S.C.)

Basic Shooting (Snapshot)

You can use your camcorder as a Digital Still Camera for

taking snapshots.

NOTE:

You should already have performed the procedures listed

below. If not, do so before continuing.

●

Power (



pg. 8)

●

Grip Adjustment (



pg. 10)

●

Viewfinder Adjustment (



pg. 10)

●

Loading A Memory Card (



pg. 13)

●

Picture Mode Setting (



pg. 16)

Set the Shooting Mode Switch to “XGA/VGA” or “UXGA”,

then set the Power Switch to “

” or “ ” while pressing

down the Lock Button located on the switch. Open the

LCD monitor fully or pull out the viewfinder fully.

Press SNAPSHOT halfway. The screen becomes a still

image, which is captured into the camcorder’s memory.

However, it is not recorded until SNAPSHOT is pressed

fully.

•At this moment, if you release SNAPSHOT, snapshot

recording will be canceled.

Press SNAPSHOT fully.

The image is recorded in the memory card .

•Still images are recorded in the snapshot mode with no

frame.

To Delete Unwanted Still Images . . .

..... when unwanted still images are stored in the memory

card or its memory is full, refer to “Deleting Images”

(

 pg. 47) and delete unwanted still images.

To Remove The Shutter Sound . . .

..... when you do not want to hear the shutter sound, set

“BEEP” to “OFF” in the Menu Screen (

 pg. 28, 31). The

sound is no longer heard from the speaker.

NOTES:

●

Even if “DIS” is set to “ON” (



pg. 29), the Stabilizer will

be disabled.

●

If Snapshot recording is not possible, “PHOTO” blinks when

SNAPSHOT is pressed.

●

If Program AE with special effects (



pg. 36) is engaged,

certain modes of Program AE with special effects are disabled

during Snapshot recording. In such a case, the icon blinks.

●

If shooting is not performed for approx. 5 minutes when the

Power Switch is set to “

” or “ ” and power is supplied

from the battery pack, the camcorder shuts off automatically

to save power. To perform shooting again, close the LCD

monitor and re-open it. When using the viewfinder, push

back it in and pull it out again.

●

The Motor Drive mode (



pg. 20) is disabled when the

Shooting Mode Switch is set to “XGA/VGA” or “UXGA”.

●

When a headphone set is connected to the PHONE

connector, the shutter sound is not heard from the speaker.

●

Still images taken are compliant to DCF (Design rules for

Camera File systems). They do not have any compatibility

with devices which are not compliant to DCF.

●

In the XGA mode, images shot using a 680,000-pixel

Progressive Scan CCD (effective area: 630,000 pixels, 962 x

654 pixels) are converted and stored in the XGA mode file

size (1024 x 768 pixels).

Power Switch

Lock Button

Number of shots taken

Displays the number of images

that have already been shot.

Display

Shooting icon

Appears and blinks during shooting.

Shooting

Mode Switch

Snapshot mode

with no frame

There is the sound of a shutter closing.

Picture Size

Displays the file size of the stored image: UXGA, XGA

or VGA. (

 pg. 16)

UXGA Mode icon

Displays the process utilized to create the UXGA size

image:

(DOUBLE) or (ENLARGE). ( pg. 16)

Card icon

Appears during shooting and blinks when a

memory card is not loaded.

Total number of shots

Displays the approximate total number of

shots that can be stored, including those

already taken. The number increases or

decreases depending on the shots stored,

the Picture mode, Shooting mode, etc.

Picture Quality

Displays the quality of the stored image: FINE or

STD (standard) (in order of quality) (

 pg. 16).

SNAPSHOT

Button

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-DV2000 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-DV2000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info