Bedienungsanleitung JVC GR-DVL167 (Seite 53 von 88) (Englisch)

39748

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

Dubbing To Or From A Video Unit Equipped

With A DV Connector (Digital Dubbing)

It is also possible to copy recorded scenes from this

camcorder onto another video unit equipped with a

DV connector. Since a digital signal is sent, there is

little if any image or sound deterioration.

[To use this camcorder as a player]

1 Make sure all units are turned off. Connect this

camcorder to a video unit equipped with a DV input

connector using a DV cable as shown in the

illustration.

2 Set this camcorder’s VIDEO/MEMORY Switch to

“VIDEO” (GR-DVL867/DVL865/DVL767/DVL765/

DVL567/DVL367/DVL365 only), then the Power

Switch to “PLAY” while pressing down the Lock

Button located on the switch, turn on the video unit’s

power, and insert the appropriate cassettes in this

camcorder and the video unit.

3 Press

to play back the source tape.

4 While watching the playback on the monitor,

engage the DV connector-equipped video unit’s

record mode from the spot on the source tape you

want to begin recording.

NOTES:

● It is recommended to use the AC Adapter as the

power supply instead of the battery pack (

੬ pg. 9).

● If the remote control is used when both the player and

recorder are JVC video units, both units will perform the

same operation. To prevent this from happening, press

the buttons on both units.

● If a blank portion or disturbed image is played back on

the player during dubbing, the dubbing may stop so that

an unusual image is not dubbed.

● Even though the DV cable is connected correctly,

sometimes the image may not appear in step 4. If this

occurs, turn off the power and make connections again.

● If “Playback Zoom” (

੬ pg. 57), “Playback Special

Effects” (

੬ pg. 56) or “Snapshot” is attempted during

playback, only the original playback image recorded on

the tape is output from the DV connector.

● When using a DV cable, be sure to use the optional

JVC VC-VDV204U DV cable.

For GR-DVL867/DVL767/DVL567/DVL367/DVL167 Owners:

[To Use This Camcorder As A Recorder]

1. Set this camcorder’s VIDEO/MEMORY Switch to “VIDEO” (GR-DVL867/DVL767/DVL567/DVL367 only),

then the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

2. Set “REC MODE” to “SP” or “LP” in the Menu Screen (੬ pg. 50).

3. Connect the DV cable as shown in the illustration and load a cassette to record on.

4. Press the Recording Start/Stop button to engage the Record-Pause mode. “

DV. IN

” appears on the screen.

5. Press the Recording Start/Stop button to start recording. rotates.

6. Press the Recording Start/Stop button again to engage the Record-Pause mode. stops rotating.

NOTES:

● Digital Dubbing is performed in the sound mode recorded on the original tape, regardless of the current “SOUND

MODE” setting (

੬ pg. 47).

● During Digital Dubbing, no signals are output from the video or audio connectors.

AUTO

PLAY

OFF

DV cable

(optional)

Video unit equipped

with DV connector

To DV

IN/OUT

To DV

Power Switch

Core filter

VIDEO/MEMORY Switch

(GR-DVL867/DVL865/DVL767/

DVL765/DVL567/DVL367/DVL365 only)

Lock Button

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-DVL167 Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-DVL167

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info