Bedienungsanleitung JVC GR-DVL317 (Seite 48 von 92) (Englisch)

595799

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

48 EN

USING MENUS FOR DETAILED ADJUSTMENT

(cont.)

Menu Screen Explanations (cont.)

: Factory-preset

NOTES:

●

The “ MANUAL” settings are effective only when the Power Switch is set to “ ”.

●

“ SYSTEM” functions which are set when the Power Switch is set to “ ” are also applied when the

Power Switch is set to “ ” (

墌

pg. 50).

Usually the distance to a subject where the lens is in focus depends on the

zoom magnification. Unless there is a distance more than 1m (3.3 ft.) to the

subject, the lens is out of focus at the maximum telephoto setting. When set

to “ON”, you can shoot a subject as large as possible at a distance of approx.

60 cm (2 ft.).

•Depending on the zoom position, the lens may go out of focus.

Records with no change in the screen ratio. For playback on a TV with a

normal screen ratio.

Inserts black bands at the top and bottom of the screen. During playback on

wide-screen TVs, the black bands at the top and bottom of the screen are cut

and the screen ratio becomes 16:9. appears. When using this mode, refer

to your wide-screen TV’s instruction manual. During playback/recording on

4:3 TVs/LCD monitor/viewfinder, black bands are inserted at the top and

bottom of the screen and the image appears like a letterboxed 16:9 movie.

•The “CINEMA” mode is effective only when the VIDEO/DSC Switch is set

to “VIDEO” (GR-DVL817 only).

For playback on TVs with an aspect ratio of 16:9. Naturally expands the

image to fit the screen without distortion. appears. When using this

mode, refer to your wide-screen TV’s instruction manual. During playback/

recording on 4:3 TVs/LCD monitor/viewfinder, the image is elongated

vertically.

•The “SQUEEZE” mode is effective only when the VIDEO/DSC Switch is set

to “VIDEO” (GR-DVL817 only).

Disengages the function which cuts down on noise created by wind.

Helps cut down on noise created by wind. “ ” appears. The quality of the

sound will change. This is normal.Even though not heard while shooting,

shutter sound is recorded on the tape.

Even though not heard while shooting, shutter sound is recorded on the tape.

The beep sounds when the power is turned on or off, and at the beginning and end

of recording. Also to activate the shutter sound effect (墌 pg. 26, 42).

Instead of a beep, a melody sounds when any operation is performed. It also

activates the shutter sound effect (墌 pg. 26, 42).

The tally lamp remains off at all times.

The tally lamp comes on to signal the start of recording.

This number is necessary when connecting the camcorder to a device such as a computer

using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting is 06.

OFF

CINEMA

SQUEEZE

OFF

BEEP

MELODY

OFF

MANUAL

SYSTEM

NUMBER

(GR-DVL517/

DVL515/

DVL317 only)

TALLY

BEEP

WIND

CUT

WIDE

MODE

TELE

MACRO

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-DVL317 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info