Bedienungsanleitung JVC GR-DVL450 (Seite 68 von 92) (Englisch)

39756

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

68 EN

SYSTEM CONNECTIONS

NOTES:

●

It is recommended to use the AC Adapter as the

power supply instead of the battery pack

(



pg. 9).

●

Never connect the USB or PC connection cable

and the DV cable simultaneously to the

camcorder. Connect only the cable you wish to

use to the camcorder.

●

If the PC connected to the camcorder via the USB

cable is not powered, the camcorder does not

enter the USB mode.

●

The date/time information cannot be captured into

the PC.

●

Refer to the instruction manuals of the PC and

Software.

●

The still images can also be transferred to a PC

with a DV connector-equipped capture board.

●

When using a DV cable, be sure to use the

optional JVC VC-VDV206U or VC-VDV204U DV

cable depending on the type of DV connector (4

or 6 pins) on the PC, or use the DV cable provided

with the capture board.

●

The system may not work properly depending on

the PC or capture board you are using.

To DV

To USB

connector

DV cable

(optional)

To DV

connector

USB cable

(provided)

To USB

Power Switch

PC with DV

connector

Core filter

VIDEO/DSC Switch (GR-DVL557/DVL555/DVL357/

DVL355 only; open the LCD monitor to access this switch.)

Core filter

RS-232C

PC connection cable

(provided with GR-DVL450/

DVL157 only)

To PC

(DIGITAL PHOTO)

GR-DVL450/DVL157/DVL150 only

GR-DVL557/DVL555/DVL357/DVL355 only

Connection To A Personal Computer

[A] Using USB or PC connection cable

This camcorder can transfer still images to a PC by

using the software (GR-DVL557/DVL555/DVL450/

DVL357/DVL355/DVL157: provided, GR-DVL150:

optional software HS-V16KIT).

[B] Using DV cable

It is also possible to transfer still images to a PC with

a DV connector by using software equipped with the

PC or commercially available software.

Make sure the camcorder and PC are turned off.

Connect the camcorder to your PC using the

appropriate cable as shown in the illustration.

For GR-DVL557/DVL555/DVL357/DVL355

Owners:

If you are using the USB connection,

set the VIDEO/DSC switch to “DSC”.

•Only the still images stored in the memory

card can be transferred to a PC.

Turn the camcorder’s Power Switch to “ ”

while pressing down the Lock Button located on

the switch and turn on the PC.

•Refer to the instruction manual of the software

on how to transfer a still image to the PC.

When finished, turn off the PC first, then the

camcorder.

For GR-DVL557/DVL555/DVL357/DVL355

Owners:

“USB MODE” and/or “ACCESSING FILE” appears

on the LCD monitor while the PC is accessing data

in the camcorder or the camcorder is transferring a

file to the PC.

NEVER disconnect the USB cable while

“ACCESSING FILE” is displayed on the LCD

monitor since this can result in product damage.

[A]Using USB or PC connection cable

[B] Using DV cable

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-DVL450 Seite 68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-DVL450

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info