Bedienungsanleitung JVC GR-DVL815 (Seite 68 von 92) (Englisch)

595793

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

68 EN

SYSTEM CONNECTIONS

NOTES:

●

In order to maintain optimum performance of the

camcorder, provided cables may be equipped with

one or more core filter. If a cable has only one core

filter, the end that is closest to the filter should be

connected to the camcorder.

●

It is recommended to use the AC Adapter as the

power supply instead of the battery pack (



pg. 9).

●

Never connect the USB or PC connection cable and

the DV cable simultaneously to the camcorder.

Connect only the cable you wish to use to the

camcorder.

●

If the PC connected to the camcorder via the USB

cable is not powered, the camcorder does not enter

the USB mode.

●

The date/time information cannot be captured into the

PC.

●

Refer to the instruction manuals of the PC and Software.

●

The still images can also be transferred to a PC with a

DV connector-equipped capture board.

●

When using a DV cable, be sure to use the optional

JVC VC-VDV206U or VC-VDV204U DV cable

depending on the type of DV connector (4 or 6 pins)

on the PC, or use the DV cable provided with the

capture board.

●

The system may not work properly depending on the

PC or capture board you are using.

To DV

IN/OUT

To USB

connector

DV cable

(optional)

To DV

connector

USB cable

(provided)

To USB

Power Switch

PC with DV

connector

Core filter

VIDEO/DSC Switch

(GR-DVL915/DVL815/DVL510 only;

open the LCD monitor to access this switch.)

Core filter

To RS-232C

PC connection

cable (provided)

To PC

(DIGITAL PHOTO)

GR-DVL310 only

GR-DVL915/DVL815/DVL510 only

Connection To A Personal Computer

[A] Using USB or PC connection cable

This camcorder can transfer still images to a PC by

using the provided software.

[B] Using DV cable

It is also possible to transfer still images to a PC with

a DV connector by using software equipped with the

PC or commercially available software.

Make sure the camcorder and PC are turned off.

Connect the camcorder to your PC using the

appropriate cable as shown in the illustration.

For GR-DVL915/DVL815/DVL510 Owners:

you are using the USB connection, set the

VIDEO/DSC switch to “DSC”.

•Only the still images stored in the memory

card can be transferred to a PC.

Turn the camcorder’s Power Switch to “ ”

while pressing down the Lock Button located on

the switch and turn on the PC.

•Refer to the instruction manual of the software

on how to transfer a still image to the PC.

When finished, turn off the PC first, then the

camcorder.

For GR-DVL915/DVL815/DVL510 Owners:

“USB MODE” and/or “ACCESSING FILE” appears

on the LCD monitor while the PC is accessing data

in the camcorder or the camcorder is transferring a

file to the PC.

NEVER disconnect the USB cable while

“ACCESSING FILE” is displayed on the LCD

monitor since this can result in product damage.

[A]Using USB or PC connection cable

[B] Using DV cable

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-DVL815 Seite 68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info