Bedienungsanleitung JVC GR-DVL9200 (Seite 28 von 68) (Englisch)

584571

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

28 EN

FOCUS

Focusing

AUTO FOCUS

The camcorder’s Full Range AF system offers continuous

shooting ability from close-up (as close as approx. 5 cm to

the subject) to infinity. However, correct focus may not be

obtainable in the situations listed below (in these cases use

manual focusing):

•When two subjects overlap in the same scene.

•When illumination is low.*

•When the subject has no contrast (difference in bright-

ness and darkness), such as a flat, one-colour wall, or a

clear, blue sky.*

•When a dark object is barely visible in the viewfinder.*

•When the scene contains minute patterns or identical

patterns that are regularly repeated.

•When the scene is affected by sunbeams or light

reflecting off the surface of a body of water.

•When shooting a scene with a high-contrast

background.

* The following low-contrast warnings appear blinking:

, , and

MANUAL FOCUS

If you are using the viewfinder, you should already have

made the necessary viewfinder adjustments (

pg. 11).

Set the Power Switch to “ ” or “5S” while pressing

down the Lock Button located on the switch, then

pull out the viewfinder fully or open the LCD monitor

fully.

Press MENU/BRIGHT. The Menu Screen appears.

Rotate MENU/BRIGHT to select “ ”, then press it.

Rotate MENU/BRIGHT to select “MANUAL” and

press it. The Menu Screen disappears and “FOCUS”

is displayed. The focus is locked at this point.

To focus on a farther subject, rotate MENU/BRIGHT

towards “+”. “ ” appears and blinks.

To focus on a nearer subject, rotate MENU/BRIGHT

towards “–”. “ ” appears and blinks.

Press MENU/BRIGHT. Focus adjustment is complete.

The “FOCUS” indication changes to “MANUAL”.

To Return To Auto Focus . . .

.... select “AUTO” in step 4. Or, set the Power Switch to

“ ”.

Focus detection

zone

MENU/BRIGHT

Dial

Power Switch

NOTES:

●

If the lens is smeared or blurred, accurate

focusing is not possible. Keep the lens clean,

wiping with a piece of soft cloth if it gets

dirty. When condensation occurs, wipe with

a soft cloth or wait for it to dry naturally.

●

When shooting a subject close to the lens,

zoom out first (

pg. 14). If zoomed-in in

the auto focus mode, the camcorder may

automatically zoom out depending on the

distance between the camcorder and the

subject. This will not occur when “TELE

MACRO” (

pg. 20) is activated.

NOTES:

●

When the power is turned off, Manual Focus

will be reset to “AUTO”.

●

Be sure to focus the lens in the maximum

telephoto position when you use the Manual

Focus mode. If you focus in on a subject in

the wide-angle position, sharply focused

images cannot be obtained when zoomed up

because the depth-of-field is reduced at

longer focal lengths.

●

When the focus level cannot be adjusted

any further or closer, “ ” or “ ” will blink.

While focusing on a

further subject

While focusing on a

nearer subject

RECORDING

Advanced Features (cont.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-DVL9200 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info