Bedienungsanleitung JVC GR-DVP8 (Seite 61 von 84) (Englisch)

533257

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

EN 61

Master Page: Right

Automatic Editing To VCR

13 Rewind the tape in the camcorder to the

beginning of the scene you want to edit and press

PAUSE (9).

14 Press VCR REC STBY (79), or manually

engage the VCR’s Record-Pause mode.

15 Press START/STOP on the remote control.

Editing proceeds as programmed, right through

to the end of the last registered scene.

● When dubbing is complete, the camcorder

enters the Pause mode, and the VCR enters its

Record-Pause mode.

● If you do not register an Edit-Out point, the

tape will be dubbed all the way to the end

automatically.

● If you operate the camcorder during automatic

editing, the VCR will enter its Record-Pause

mode and automatic editing will stop.

16 Engage the Stop modes for the camcorder and

the VCR.

To make the R.A.Edit counter display disappear,

press R.A.EDIT ON/OFF on the remote control.

NOTES:

● Pressing R.A.EDIT ON/OFF on the remote control

clears all settings registered during Random

Assemble Editing.

● When the editing cable is connected to the remote

control’s PAUSE IN connector during dubbing,

make sure the remote control is pointed at the

VCR’s sensor, and the path between the two is

unobstructed.

● Random Assemble Editing may not function

properly when using a tape including several

duplicated time codes. (੬ pg. 19)

For More Accurate Editing

Some VCRs make the transition from Record-Pause

to Record mode faster than others. Even if you begin

editing for the camcorder and the VCR at exactly the

same time, you may lose scenes you wanted, or find

that you have recorded scenes you did not want. For

a cleanly edited tape, confirm and adjust the timing

of the camcorder against your VCR.

Diagnosing VCR/Camcorder Timing

1 Play back the tape in the camcorder, then point

the remote control at the camcorder’s remote

sensor and press R.A.EDIT ON/OFF.

Random Assemble Editing Menu appears.

2 Perform Random Assemble Editing on Program 1

only. In order to check VCR and camcorder

timing, select the beginning of a scene transition

as your Edit-In point.

3 Play back the dubbed scene.

● If any images from the scene prior to the

transition you chose for your Edit-In point were

recorded, that means your VCR moves too

quickly from Record-Pause to Record mode.

● If the scene you tried to dub starts in progress,

the VCR is slow to start recording.

Adjustment Of VCR/Camcorder Timing

4 Press R.A.EDIT ON/OFF to make the Random

Assemble Editing menu disappear, then press

MENU. The Menu Screen appears.

5 Press + or – to select “t”, and press SET/

SELECT. The VIDEO Menu appears.

6 Press + or – to select “SYNCHRO”, and press

SET/SELECT. The value for “SYNCHRO” is

highlighted.

7 Based on the diagnostics performed, you can

now advance the VCR’s record timing by pressing

+. You can also delay the VCR’s record timing by

pressing –.

The adjustment range is from –1.3 to +1.3

seconds, in 0.1-second increments.

Press SET/SELECT to finish the setting.

8 Press + or – to select “BRETURN”, and press SET/

SELECT twice.

Now perform Random Assemble Editing

beginning with step 6 on page 60.

NOTES:

● Before performing actual Random Assemble

Editing, do a few Random Assemble Editing trial

runs to check whether the value you have input is

appropriate or not, and make adjustments

accordingly.

● Depending on the recorder, there may be

situations where the timing difference cannot be

fully corrected.

–– : –– ~

––

NIOUT

MOD E

–

––

000

TOTAL

CODETIME

Random Assemble

Editing Menu

Program 1

ADVANCED FEATURES

GR-DVP9-8PAL.book Page 61 Friday, February 7, 2003 12:35 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-DVP8 Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info