Bedienungsanleitung JVC GR-DVX10 (Seite 82 von 100) (Englisch)

39776

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

82 EN

TROUBLESHOOTING

(cont.)

SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION

24.

Even when Slow Shutter is

not selected, the image looks

like it is activated.

25.

There is no strobe when the

Classic Film or Strobe mode

is activated.

26.

White Balance cannot be

activated.

27.

When shooting a subject

illuminated by bright light,

vertical lines appear.

28.

When the screen is under

direct sunlight during

shooting, the screen becomes

red or black for an instant.

29.

During recording, the date/

time does not appear.

30.

Files stored in the

MultiMediaCard cannot be

deleted.

31.

The indicators and messages

do not appear.

32.

Images on the LCD monitor

appear dark or whitish.

33.

The rear of the LCD monitor

is hot.

34.

The indicators and the image

colour on the LCD monitor

are not clear.

24.

• When shooting in the dark,

the unit becomes highly

sensitive to light and the

image takes on an effect

similar to Slow Shutter.

25.

• The Picture Wipe or Dissolve

function is in use.

26.

• The Sepia or Monotone mode

is activated.

27.

• This is a result of exceedingly

high contrast, and is not a

malfunction.

28.

• This is not a malfunction.

29.

•“DATE/TIME” is set to “OFF”

in the Menu Screen.

• Self-Recording is performed.

30.

• Files stored in the

MultiMediaCard are protected.

31.

•“ON SCREEN” is set to

“SIMPLE” or “TIME CODE” is

set to “OFF” in the Menu

Screen.

32.

• In places subject to low

temperature, images become

dark due to the characteristics

of the LCD monitor. When

this happens, the displayed

colours differ from those that

are actually recorded. This is

not a defect of the camcorder.

• When the LCD monitor's

fluorescent light reaches the

end of its service life, images

on the LCD monitor become

dark. Consult your nearest

JVC dealer.

33.

• The light used to illuminate

the LCD monitor causes it to

become hot.

34.

• This may occur when the

surface or the edge of the LCD

monitor is pressed.

24.

• If you want the lighting to

look more natural, set GAIN

UP to “AGC” or “OFF” in the

Menu Screen (

 pg. 27).

25.

• Do not try to use the Classic

Film or Strobe mode during a

scene transition (

 pg. 34,

36).

26.

• Turn off Sepia or Monotone

before setting White Balance

(

 pg. 36, 39).

27.

————

28.

————

29.

• Set “DATE/TIME” to “ON” in

the Menu Screen (

 pg. 29).

• During Self-Recording, the

date/time does not appear

(

 pg. 17).

30.

• Remove protection from the

files stored in the

MultiMediaCard and delete

them (

 pg. 48, 49).

31.

• Set “ON SCREEN” to “LCD”

or “LCD/TV” and set “TIME

CODE” to “ON” in the Menu

Screen (

 pg. 29, 41).

32.

• Adjust the brightness and

angle of the LCD monitor

(

 pg. 16, 17).

33.

• Close the LCD monitor to turn

it off or set the POWER

Switch to “OFF”, and let the

unit cool down.

34.

————

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-DVX10 Seite 82

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-DVX10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info